NCKUEE Faculty Data
Chinese Version
Distinguished Professor Shyh-Jier Huang
Address
EE Building 7F R92711
Email
TEL
+886-6-2757575 ext.32506
Lab
Computational Intelligence Applied to Power Laboratory
(R92771/ext.62400-1571)
Background
Educations
1994
Ph.D., Electrical Engineering Department, University of Washington, U.S.A.
1987
M.S., Electrical Engineering Department, National Cheng Kung University, R.O.C.
1985
B.S., Electrical Engineering Department, National Cheng Kung University, R.O.C.
Experiences
2006-
Distinguished Professor, National Cheng Kung University
2017-
Member of Council, Taiwan Power and Energy Engineering Association
2011-2012
Director, Electric Motor Technology Research Center, National Cheng Kung University
2003-2009
Director, Instrument Technology Research Center, National Cheng Kung University
2003-2009
Director, Electromechanical Division, Office of R& D, National Cheng Kung University
2003-2006
Deputy Secretary-General, Academia-Industry Consortium for Southern Taiwan Science Park
2003-2004
Chairman, Taipei Chapter, IEEE Power and Energy Society
2001-
Professor, National Cheng Kung University
1998-2001
Associate Professor, National Cheng Kung University
1997-1998
Assistant Professor, National Cheng Kung University
1994-1997
Associate Professor, I-Shou University
1991-1994
Research Assistant, University of Washington, U.S.A.
Specialities
  • Computational Intelligence Applied to Power
  • Power Planning and Equipment Operation
  • Storage System and Renewable Energy
  • Electric Power Equipments
  • Wireless Charging
Publication
Journal
more
less
  1. T. S. Lee, S. J. Huang, and M. J. Wu, “Enhancement of Wireless Power Transfer for Automated Guided Vehicles Considering Disturbance Suppression”, IEEE Access, Vol. 11, March 2023, pp. 21508-21518.
  2. S. J. Huang, T. S. Lee, Y. M. Yang, and J. Y. Chen, “Intermediate Coil-Aided Wireless Charging via Interactive Power Transmitting with Misalignment Tolerating Considerations”, IEEE Transactions on Industrial Electronics, Vol. 69, No. 10, October 2022, pp. 9972-9983.
  3. T. S. Lee, S. J. Huang, and S. H. Dai, “Contactless Power Transfer for Rail-Guided Vehicles with Power Equalization and Efficiency Improvement Considerations”, IEEE Transactions on Industrial Electronics, Vol. 69, No. 4, April 2022, pp. 3566-3576.
  4. T. S. Lee, S. J. Huang, Y. R. Lin, T. C. Hung, and C. C. Chen, “Combination of Filament-Heating and Cavity-Driven Circuit with Gain-Frequency Regulation Control for Magnetrons”, IEEE Transactions on Power Electronics, Vol. 36, No. 2, February 2021, pp. 1921-1930.
  5. T. S. Lee, S. J. Huang, S. H. Dai, and J. L Su, “Design of Misalignment Insensitive Inductive Power Transfer via Interoperable Coil Module and Dynamic Power Control”, IEEE Transactions on Power Electronics, Vol. 35, No. 9, September 2020, pp. 9024-9033.
  6. S. J. Huang, T. S. Lee, W. H. Li, and R. Y. Chen, “Modular On-Road AGV Wireless Charging Systems via Interoperable Power Adjustment”, IEEE Transactions on Industrial Electronics, Vol. 66, No. 8, August 2019, pp. 5918-5928.
  7. K. C. Huang and S. J. Huang, “Design Enhancement of Power Supply System for BLDC Motor-Driven Circuit with State-of-Charge Equalization and Capacity Expansion”, IEEE Transactions on Industrial Electronics, Vol. 65, No. 11, November 2018, pp. 8613-8623.
  8. T. S. Lee, S. J. Huang, P. J. Chiang, and K. C. Huang, “Modular Design and Analysis of Plasma-Driven System with Integrated Resonant Circuit and Capacity Expansion Mechanism”, IEEE Transactions on Industrial Electronics, Vol. 65, No. 2, February 2018, pp. 1226-1234.
  9. S. J. Huang, K. C. Huang, T. C. Hung, S. Y. Liu, P. Y. Wen, and T. S. Lee, “Design of Hybrid Power Supply System with Energy Regulation Capability for Hand-Held Tools”, IEEE Transactions on Industrial Electronics, Vol. 64, No. 2, February 2017, pp. 1148-1156.
  10. T. S. Lee, S. J. Huang, R. Y. Chen, and Y. H. Yeh, “Enhancement of Plasma Driven System with Piezoelectric Transformer-Based Feedback Control Approaches and Contactless Power Source”, IEEE Transactions on Industrial Electronics, Vol. 62, No.12, December 2015, pp. 7469-7478.
  11. S. J. Huang, T. C. Hung, and C. W. Lin, “Ozone-Driven Circuit Design Enhanced with an Improved Half-Bridge Inverter of Wide Input-Voltage Capability”, IEEE Transactions on Industrial Electronics, Vol. 62, No. 8, August 2015, pp. 4777-4786.
  12. J. Y. Cheng, C. T. Hsieh, S. J. Huang, “Application of Gabor-Wigner Transform to Inspect High-Impedance Fault-Generated Signals”, International Journal of Electric Power and Energy Systems, Vol. 73, December 2015, pp. 192-199.
  13. S. J. Huang and C. W. Hsieh, and H. H. Wan, “Confirming the Permissible Capacity of Distributed Generation for Grid-Connected Distribution Feeders”, Letters, IEEE Transactions on Power Systems, Vol. 30, No. 1, January 2015, pp. 540-541.
  14. S. J. Huang, T. S. Lee, and T. H. Huang, “Inductive Power Transfer Systems for PT-based Ozone-Driven Circuit with Flexible Capacity Operation and Frequency-Tracking Mechanism”, IEEE Transactions on Industrial Electronics, Vol. 61, No. 12, December 2014, pp. 6691-6699.
  15. S. J. Huang, T. S. Lee, and P. Y. Lin, “Application of Piezoelectric Transformer-Based Resonant Circuits for AC LED Lighting-Driven Systems with Frequency-Tracking Techniques”, IEEE Transactions on Industrial Electronics, Vol. 61, No. 12. December 2014, pp. 6700-6709.
  16. S. J. Huang and T. S. Lee, “Enhancing Luminance of CCL-Based Lighting Systems Using Low-Frequency Driving Techniques”, IEEE Transactions on Industrial Electronics, Vol. 61, No. 7, July 2014, pp. 3279-3287.
  17. S. J. Huang and C. H. Hsieh, “A Method to Enhance the Predictive Maintenance of ZnO Arresters in Energy Systems”, International Journal of Electric Power and Energy Systems, Vol. 62, November 2014, pp. 183-188.
  18. C. C Chen, C. C. Tai, S. J. Huang, Y. H. Chen, and C. H. Lin, “Thermotherapy Induction Heating Apparatus with New Magnetic-Wrapped Coil Design”, IEEE Transactions on Industrial Electronics, Vol. 61, No. 5, May 2014, pp. 2592-2600.
  19. S. J. Huang and X. Z. Liu, “Fault Section Estimation in Distribution Systems Using Biogeography-Based Optimization Approaches”, International Transactions on Electrical Energy Systems, November 2013, DOI:10.1002/etep.1831.
  20. S. J. Huang, X. Z. Liu, W. F. Su, and S. H. Yang, “Application of Hybrid Firefly Algorithm for Sheath Loss Reduction of Underground Transmission Systems”, IEEE Transactions on Power Delivery, Vol. 28, No. 4, October 2013, pp. 2085-2092.
  21. S. J. Huang and C. H. Hsieh, “Relation Analysis for Ferroresonance of Bus Potential Transformer and Circuit Breaker Grading Capacitance”, International Journal of Electric Power and Energy Systems, Vol. 51, October 2013, pp. 61-70.
  22. S. J. Huang, X. Z. Liu, W. F. Su, and T. J. Ou, “Application of Enhanced Honey-Bee Mating Optimization Algorithm to Fault Section Estimation in Power Systems”, Vol. 28, No. 3, IEEE Transactions on Power Delivery, July 2013, pp. 1944-1951.
  23. S. J. Huang, B. G. Huang, and F. S. Pai, “Fast Charge Strategy Based on the Characterization and Evaluation of LiFePO4 Batteries”, IEEE Transactions on Power Electronics, Vol. 28, No. 4, April 2013, pp. 1555-1562.
  24. S. J. Huang and X. Z. Liu, “Application of Artificial Bee Colony-Based Optimization for Fault Section Estimation in Power Systems”, International Journal of Electric Power and Energy Systems, Vol. 44, No. 1, January 2013, pp. 210-218.
  25. J. Y. Cheng, C. T. Hsieh, S. J. Huang, and C. M. Huang, “Application of Modified Wigner Distribution Method to Voltage Flicker-Generated Signals”, International Journal of Electric Power and Energy Systems, Vol. 44, No. 1, January 2013, pp. 275-281.
  26. S. J. Huang and C. W. Hsieh, “Confirmation of Photovoltaic Generation through Recognition of Inverter Output Signals”, Letters, IEEE Transactions on Sustainable Energy, Vol. 4, No. 1, January 2013, pp. 275-276.
  27. S. J. Huang and X. Z. Liu, “A Plant Growth-Based Optimization Approach Applied to Capacitor Placement in Power Systems”, IEEE Transactions on Power Systems, Vol. 27, No. 4, November 2012, pp. 2138-2145.
  28. S. J. Huang, B. G. Huang, and F. S. Pai, “An Approach to Measurements of Electrical Characteristics of Lithium-ion Battery with OCV Function”, IET- Power Electronics, Vol. 5, No. 9, November 2012, pp. 1968-1975.
  29. S. J. Huang and H. H. Wan, “Determination of Suitability between Wind Turbine Generators and Sites including Power Density and Capacity Factor Consideration”, IEEE Transactions on Sustainable Energy, Vol. 3, No. 3, July 2012, pp. 390-397.
  30. S. J. Huang and H. H. Wan, “A Modular Approach to Enhance Capacity Factor Computation of Wind Turbine Generators”, Letters, IEEE Transactions on Energy Conversion, Vol. 26, No. 3, September 2011, pp. 987-989.
  31. F. S. Pai, C. L. Ou, and S. J. Huang, “Plasma-Driven System Circuit Design with Asymmetrical Pulse Width Modulation Scheme”, IEEE Transactions on Industrial Electronics, Vol. 58, No.9, September 2011, pp. 4167-4174.
  32. F. S. Pai, J. M. Lin, and S. J. Huang, “Design of an Inverter Array for Distributed Generations with Flexible Capacity Operations”, IEEE Transactions on Industrial Electronics, Vol. 57, No. 12, December 2010, pp. 3927-3934.
  33. S. J. Huang and H. H. Wan, “A Method to Enhance Ground-Fault Computation”, IEEE Power Engineers Letters, published in IEEE Transactions on Power Systems, Vol. 25, No.2, May 2010, pp. 1190-1191.
  34. C. T. Hsieh, J. M. Lin, and S. J. Huang, “Slant Transform Applied to Electric Power Quality Detection with Field Programmable Gate Array Design Enhanced”, International Journal of Electric Power and Energy Systems, Vol. 32, No. 5, June 2010, pp. 428-432.
  35. S. J. Huang and H. H. Wan, “Enhancement of Auxiliary Overcurrent Protection in Transformers Using Novel Feature Extraction Algorithms”, European Transactions on Electrical Power, DOI: 10.1002/etep.391, November 2010.
  36. S. J. Huang and H. H. Wan, “Enhancement of Matching Turbine Generators with Wind Regime Using Capacity Factor Curves Strategy”, IEEE Power Engineers Letters, published in IEEE Transactions on Energy Conversion, Vol. 24, No.2, June 2009, pp. 551-553.
  37. F. S. Pai and S. J. Huang, “Design and Operation of Power Converter for Micro-Turbine Powered Distributed Generator with Capacity-Expansion Capability,” IEEE Transactions on Energy Conversion, Vol. 23, No. 1, March 2008, pp. 110-118.
  38. C. T. Hsieh, S. J. Huang, C. H. Huang, and F. H. Hsu, “Application of Hilbert-Huang Transform Based Approach to Supervise Power System Disturbances,” International Journal of Electrical Engineering, Vol. 15, No. 6, December 2008, pp. 425-434.
  39. C. T. Hsieh, J. M. Lin, and S. J. Huang, “Enhancement of Islanding-Detection of Distributed Generation Systems via Wavelet Transform-Based Approaches”, International Journal of Electric Power and Energy Systems, Vol. 30, No. 1, November 2008, pp. 575-580.
  40. C. S. Tsai, C. T. Hsieh, and S. J. Huang, “Enhancement of Damage-Detection of Wind Turbine Blades via CWT-Based Approaches,” IEEE Transactions on Energy Conversion, Vol. 21, No. 3, September 2006, pp. 776-781.
  41. F. S. Pai and S. J. Huang, “A Novel Design of Line-interactive Uninterruptible Power Supplies without Load Current Sensors,” IEEE Transactions on Power Electronics, Vol. 21, No.1, January 2006, pp. 202-210.
  42. S. J. Huang and M. J. Jou, “Application of Arithmetic Coding for Electric Power Disturbance Data Compression with Wavelet Packet Enhancement,” IEEE Transactions on Power Systems, Vol. 19, No. 3, August 2004, pp. 1334-1341.
  43. C. W. Lu and S. J. Huang, “An Application of B-Spline Wavelet Transform for Notch Detection Enhancement,” IEEE Transactions on Power Delivery, Vol. 19, No. 3, July 2004, pp. 1419-1425.
  44. S. J. Huang and C. W. Lu, “Enhancement of Digital Equivalent Voltage Flicker Measurement via Continuous Wavelet Transform,” IEEE Transactions on Power Delivery, Vol. 19, No. 2, April 2004, pp. 663-670.
  45. S. J. Huang and J. M. Lin, “Enhancement of Anomalous Data Mining in Power System Predicting-Aided State Estimation,” IEEE Transactions on Power Systems, Vol. 19, No. 1, February 2004, pp. 610-619.
  46. S. J. Huang and K. R. Shih, “Short-Term Load Forecasting via ARMA Model Identification Including Non-Gaussian Process Considerations,” IEEE Transactions on Power Systems, Vol. 18, No. 2, May 2003, pp. 673-679.
  47. C. J. Huang, S. J. Huang, and F. S. Pai, “Design of Dynamic Voltage Restorer with Disturbance-Filtering Enhancement,” IEEE Transactions on Power Electronics, Vol. 18, No. 5, September 2003, pp. 1202-1210.
  48. J. M. Lin, S. J. Huang, and K. R. Shih, “Application of Sliding Surface-Enhanced Fuzzy Control for Dynamic State Estimation of A Power System,” IEEE Transactions on Power Systems, Vol. 18, No. 2, May 2003, pp. 570-577.
  49. C. T. Hsieh and S. J. Huang, “Disturbance Data Compression of A Power System Using the Huffman Coding Approach with Wavelet Transform Enhancement,” IEE Proceedings- Generation, Transmission and Distribution, Vol. 150, No. 1, January 2003, pp. 7-14.
  50. S. J. Huang and K. R. Shih, “Dynamic State Estimation Scheme Including Nonlinear Measurement Function Considerations,” IEE Proceedings- Generation, Transmission and Distribution, Vol. 149, No. 6, November 2002, pp. 673-678.
  51. S. J. Huang and K. R. Shih, “Application of A Fuzzy Model for Short-Term Load Forecast with Group Method of Data Handling Enhancement,” International Journal of Electric Power and Energy Systems, Vol. 24, No. 8, October 2002, pp. 631-638.
  52. S. J. Huang and J. M. Lin, “Enhancement of Power System Data Debugging Using GSA-Based Data Mining Technique,” IEEE Transactions on Power Systems, Vol. 17, No. 4, November 2002, pp. 1022-1029.
  53. S. J. Huang, “Application of Immune-Based Optimization Method for Fault-Section Estimation in A Distribution System,” IEEE Transactions on Power Delivery, Vol. 17, No. 3, July 2002, pp. 779-784.
  54. S. J. Huang, T. M. Yang, and J. C. Huang, “FPGA Realization of Wavelet Transform for Detection of Electric Power System Disturbances,” IEEE Transactions on Power Delivery, Vol. 17, No. 2, April 2002, pp. 388-394.
  55. S. J. Huang and C. T. Hsieh, “Coiflet Wavelet Transform Applied to Inspect Power System Disturbances-Generated Signals,” IEEE Transactions on Aerospace and Electronic Systems, Vol. 38, No. 1, January 2002, pp. 204-210.
  56. S. J. Huang and C. C. Lin, “Application of ATM-Based Network for An Integrated Distribution SCADA-GIS System,” IEEE Transactions on Power Systems, Vol. 17, No. 1, February 2002, pp. 80-86.
  57. K. R. Shih and S. J. Huang, “Application of A Robust Algorithm for Dynamic State Estimation of A Power System,” IEEE Transactions on Power Systems, Vol. 17, No. 1, February 2002, pp. 141-147.
  58. S. J. Huang and F. S. Pai, “Design and Operation of Burn-In Test System for Three-Phase Uninterruptible Power Supplies,” IEEE Transactions on Industrial Electronics, Vol. 49, No. 1, February 2002, pp. 256-263.
  59. F. S. Pai and S. J. Huang, “A Detection Algorithm for Islanding-Prevention of Dispersed Consumer-Owned Storage and Generating Units,” IEEE Transactions on Energy Conversion, Vol. 16, No. 4, December 2001, pp. 346-351.
  60. W. F. Su, S. J. Huang and C. E. Lin, “Economic Analysis for Demand-Side Hybrid Photovoltaic and Battery Energy Storage Systems,” IEEE Transactions on Industrial Applications, Vol. 37, No. 1, January/February 2001, pp. 171-177.
  61. S. J. Huang, “Enhancement of Hydroelectric Generation Scheduling Using Ant Colony System Based Optimization Approach,” IEEE Transactions on Energy Conversion, Vol. 16, No. 3, September 2001, pp. 296-301.
  62. S. J. Huang, “Static Security Assessment of A Power System Using Query-Based Learning Approaches with Genetic Enhancement,” IEE Proceedings: Generation, Transmission and Distribution, Vol. 148, No. 4, July 2001, pp. 319-325.
  63. S. J. Huang and C. T. Hsieh, “Visualizing Time-Varying Power System Harmonics Using A Morlet Wavelet Transform Approach,” International Journal of Electric Power System Research, Vol. 58, No. 2, June 2001, pp. 81-88.
  64. S. J. Huang and C. T. Hsieh, “Feasibility of Fractal-Based Methods for Visualization of Power System Disturbances,” International Journal of Electric Power and Energy Systems, Vol. 23, No. 1, January 2001, pp. 31-36.
  65. S. J. Huang and F. S. Pai, “Design and Operation of Grid-Connected Photovoltaic System with Power-Factor Control and Active Islanding-Detection,” IEE Proceedings: Generation, Transmission and Distribution, Vol. 148, No. 3, May 2001, pp. 243-250.
  66. S. J. Huang and C. C. Huang, “An Adaptive Approach to Load Shedding Including Pumped-Storage Units Considerations,” IEE Proceedings: Generation, Transmission and Distribution, Vol. 148, No. 2, March 2001, pp. 165-171.
  67. S. J. Huang and C. C. Huang, “A Time-Oriented Approach for the Load-Shedding Design in an Isolated Power System,” Proceedings of the NSC - Part A: Physical Science and Engineering, Vol. 25, No. 3, May 2001, pp. 195-201.
  68. S. J. Huang and C. T. Hsieh, “Application of Continuous Wavelet Transform for Study of Voltage Flicker-Generated Signals,” IEEE Transactions on Aerospace and Electronic Systems, Vol. 36, No. 3, July 2000, pp. 925-932.
  69. S. J. Huang, “An Immune-Based Optimization Method to Capacitor Placement of A Radial Distribution System,” IEEE Transactions on Power Delivery, Vol. 15, No. 2, April 2000, pp. 744-749.
  70. C. W. Lu, S. J. Huang, and C. L. Huang, “Flicker Characteristics Estimation of An AC Electric Arc Furnace,” International Journal of Electric Power System Research, Vol. 54, No.1, April 2000, pp. 121-130.
  71. S. J. Huang and F. S. Pai, “A New Approach to Islanding Detection of Dispersed Generators with Self-Commutated Static Power Converters,” IEEE Transactions on Power Delivery, Vol. 15, No. 2, April 2000, pp. 500-507.
  72. S. J. Huang and C. C. Huang, “An Automatic Load Shedding Scheme Including Pumped-Storage Units,” IEEE Transactions on Energy Conversion, Vol. 15, No. 4, December 2000, pp. 427-432.
  73. S. J. Huang and C. C. Huang, “An Adaptive Load Shedding Method with Time-Based design for Isolated Power Systems,” International Journal of Electric Power and Energy Systems, Vol. 22, No. 1, January 2000, pp. 51-58.
  74. S. J. Huang, “Application of Genetic-Based Fuzzy Systems to Hydroelectric Generation Scheduling,” IEEE Transactions on Energy Conversion, Vol. 14, No. 3, September 1999, pp. 724-730.
  75. C. C. Huang and S. J. Huang, “A Time-Based Load Shedding Protection for Isolated Power Systems,” International Journal of Electric Power System Research, Vol. 52, No.2, November 1999, pp. 161-169.
  76. S. J. Huang and J. C. Wu, “Design and Operations of Cascaded Active Power Filters for the Reduction of Harmonic Distortions in A Power System,” IEE Proceedings: Generation, Transmission and Distribution, Vol. 146, No. 2, March 1999, pp. 193-199.
  77. S. J. Huang and C. T. Hsieh, “High Impedance Fault Detection Utilizing A Morlet Wavelet Transform Approach,” IEEE Transactions on Power Delivery, Vol. 14, No. 4, October 1999, pp. 1401-1410.
  78. S. J. Huang, “Enhancement of Thermal Unit Commitment Using Immune Algorithms Based Optimization Approaches,” International Journal of Electric Power and Energy Systems, Vol. 21, No. 4, May 1999, pp. 245-252.
  79. S. J. Huang, J. C. Wu, and H. L. Jou, “New Phase Shift Control Circuit for A Voltage-Source Voltage-Control Active Power Filter,” International Journal of Electronics, Vol. 86, No. 4, April 1999, pp. 475-485.
  80. J. C. Wu and S. J. Huang, “A Novel Control Algorithm for Active Power Conditioner without Load Current Sensors,” International Journal of Electronics, Vol. 86, No. 11, November 1999, pp. 1411-1422.
  81. S. J. Huang, C. T. Hsieh, and C. L. Huang, “Application of Morlet Wavelets to Supervise Power System Disturbances,” IEEE Transactions on Power Delivery, Vol. 14, No. 1, January 1999, pp. 235-243.
  82. S. J. Huang, J. C. Wu, and H. L. Jou, “A Study of Three-Phase Active Power Filters under Non-ideal Mains Voltages,” International Journal of Electric Power System Research, Vol. 49, No. 2, January 1999, pp. 129-137.
  83. S. J. Huang and J. C. Wu, “A Control Algorithm for Three-Phase Three-Wired Active Power Filters Under Non-ideal Mains Voltage,” IEEE Transactions on Power Electronics, Vol. 14, No. 4, July 1999, pp. 753-760.
  84. C. T. Hsieh, S. J. Huang, and C. L. Huang, “Data Reduction of Power Quality Disturbances- A Wavelet Transform Approach,” International Journal of Electric Power System Research, Vol. 47, No. 2, October 1998, pp. 79-86.
  85. S. J. Huang and C. T. Hsieh, “Application of Wavelets to Classify Power System Disturbances,” International Journal of Electric Power System Research, Vol. 47, No. 2, October 1998, pp. 87-93.
  86. S. J. Huang, J. C. Wu, and H. L. Jou, “Electric Power Quality Improvement Using Parallel Active Power Conditioners,” IEE Proceedings: Generation, Transmission and Distribution, Vol. 145, No. 5, September 1998, pp. 597-603.
  87. S. J. Huang and C. T. Hsieh, “A Wavelet-Aided Approach to Visualization of Power System Harmonic Trends,” Proceedings of the NSC - Part A: Physical Science and Engineering, Vol. 22, No. 4, July 1998, pp. 517-523.
Conference
more
less
  1. S. J. Huang, P. W. Yang, W. F. Su, J. X. Wei, and H. Y. Hsieh, “Application of Reduced HHL Quantum Algorithm for Distributed State Estimation of Power Grid”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  2. S. J. Huang, J. X. Wei, W. F. Su, H. Y. Hsieh, and P. W. Yang, “Analysis and Study of Generative Adversarial Networks Applied for Response Performance Improvement of Grid-forming Inverters”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  3. S. J. Huang, H. Y. Hsieh, W. F. Su, P. W. Yang, and J. X. Wei, “Application of Slime Mould Algorithm to Decision Planning of Distributed Generation Placement and Capacity Selection”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  4. M. S. Lyu, S. J. Huang, B. J. Lin, W. X. Zeng, and Z. Y. Wu, “Design and Realization of A Wireless Charging System with Constant Current Constant Voltage Output and Zero-Phase Angle Input”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  5. B. J. Lin, S. J. Huang, M. S. Lyu, W. X. Zeng, and Z. Y. Wu, “Integration of Multi-Resonant Converter with Voltage-Doubling Circuit for Voltage-Output Expansion”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  6. Z. Y. Wu, S. J. Huang, B. J. Lin, W. X. Zeng, and M. S. Lyu, “Analysis of Equivalent Model of Wireless Power Transmission Systems Using Seawater as Medium”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  7. W. X. Zeng, S. J. Huang, B. J. Lin, M. S. Lyu, and Z. Y Wu, “Analysis and Implementation of Bidirectional LCC-LCC Wireless Power Transfer Circuit and System”, Proceedings of the 44th Symposium on Electrical Power Engineering, Taiwan, December 2023 (accepted).
  8. S. J. Huang, Z. Z. Wu, W. F. Su, and Y. L. Chen, “Feasibility Study of Quantum Computing Applied for Power Flow Computations”, Proceedings of the 43rd Symposium on Electrical Power Engineering, Taiwan, December 2022 (accepted)
  9. S. J. Huang, Y. L. Chen, W. F. Su, and Z. Z. Wu, “Security Improvement of Power Transactions with Consortium Blockchain including Zero-Knowledge Authentication” Proceedings of the 43rd Symposium on Electrical Power Engineering, Taiwan, December 2022 (accepted)
  10. Q. X. Wang, S. J. Huang, H. S. Hsu, and K. T. Chen, “Resonant Relay Coil-Aided Wireless Charging System for Electric Scooters with Enhanced Misalignment Tolerance”, Proceedings of the 43rd Symposium on Electrical Power Engineering, Taiwan, December 2022 (accepted)
  11. S. J. Huang, T. W. Yang, W. F. Su, and C. Y. Tsai, “Application of Sensitivity Analysis to Assess the Impact of False Data Injection in a Power Grid”, Proceedings of the 43rd Symposium on Electrical Power Engineering, Taiwan, December 2022 (accepted)
  12. H. S. Hsu, S. J. Huang, Q. X. Wang, and K. T. Chen, “Design of Single-Input-Dual-Output Multi-Resonant DC-DC Converter with Considerations of Input Voltage Range Expansion”, Proceedings of the 43rd Symposium on Electrical Power Engineering, Taiwan, December 2022(accepted)
  13. K. T. Chen, S. J. Huang, H.S. Hsu, and Q.X. Wang, “Circuit Design of Full-bridge Three-Resonant-Tank Based LLC Converter with Enhanced Adaptability of Load Variations” Proceedings of the 43rd Symposium on Electrical Power Engineering, Taiwan, December 2022 (accepted)
  14. S. J. Huang, T. R. Chen, T. C. Hung, T. S. Lee, Y. C. Hung, C. M. Cheng, and H. C. Lin, “Development of Insulation Resistance Measurement System for Multi-layer Ceramic Capacitors with Voltage Adjustment and Testing Accuracy Improvement Considerations”, Proceedings of the 16th Intelligent Living Technology Conference, Taiwan, June 2022, pp. 121-126.
  15. P. S. Chiu, S. J. Huang, and Y. H. Liao, “Intelligent Decision-Making of Circuit Breakers Inspection Scheduling in a Distribution System Using Lightning Search Algorithm”, Proceedings of the 16th Intelligent Living Technology Conference, Taiwan, June 2022, pp. 386-393.
  16. S. J. Huang, Y. C. Yang, W. F. Su, and P. C. Chen, “Application of Human Urbanization Algorithm for Energy-Storage Scheduling with Power-Purchasing Considerations”, Proceedings of the 42nd Symposium on Electrical Power Engineering, Taiwan, November 2021, pp. 2051-007.1-2051-007.6.
  17. S. J. Huang, P. C. Chen, W. F. Su and Y. C. Yang, “Depth Estimation of Battery Discharging and Its Application for Integrated Cost Calculation of Energy-Storage Systems”, Proceedings of the 42nd Symposium on Electrical Power Engineering, Taiwan, November 2021, pp. 2051-008.1-2051-008.6.
  18. Y. C. Hung, S. J. Huang, and J. W. Guo, “Design and Development of Wireless Power Transmission System Aided by Elliptical Relay Coils”, Proceedings of the 42nd Symposium on Electrical Power Engineering, Taiwan, November 2021, pp. 2055-008.1-2055-008.6.
  19. S. J. Huang, H. C. Lin, and C. M. Cheng, “Design and Realization of Induction Heating System Combined with Resonant Coil for Heating of Non-Ferromagnetic Loads”, Proceedings of the 42nd Symposium on Electrical Power Engineering, Taiwan, November 2021, pp. 2055-002.1-2055-002.6
  20. S. J. Huang, C. M. Cheng, and H. C. Lin, “Design and Implementation of Two-to-one Wireless Power Transfer System with a Hexagonal Transmission Coil”, Proceedings of the 42nd Symposium on Electrical Power Engineering, Taiwan, November 2021, pp. 2055-009.1-2055-009.6.
  21. S. J. Huang, P. J. Chen, W. F. Su, and P. K. Chen, “Scheduling of Electric Vehicle Charging and Discharging Including Consortium Blockchain Transaction Considerations” Proceedings of the 41st Symposium on Electrical Power Engineering, Taiwan, September 2020, pp. 8.1-8.6.
  22. S. J. Huang, J. W. Kuo, T. S. Lee, M. J. Wu, “Design and Implementation of Wireless Power Transfer System with Three-Dimensional Coil Design Applied to Factory Mobile Device”, Proceedings of the 41st Symposium on Electrical Power Engineering, Taiwan, September 2020, pp.29.1-29.6.
  23. S. J. Huang, J. Y. Chen, T. S. Lee, M. J. Wu, and Y. T. Lin, “Design of Dual-Output Wireless Power Transmission with Backup Power Considerations for Electric Scooter Applications”, IEEE 45th Annual Conference of Industrial Electronics, IECON 2019, Lisbon, Portugal, October 2019, pp. 3463-3467.
  24. T. S. Lee, Y. T. Lin, S. J. Huang, J. Y. Chen, and Y. M. Yang, “Realization Assessment of Coaxial Symmetrical Coils for Two-to-One Inductive Power Transfer in Rail Charging Applications”, IEEE 45th Annual Conference of Industrial Electronics, IECON 2019, Lisbon, Portugal, October 2019, pp. 3474-3478.
  25. Y. M. Yang, S. J. Huang, J. Y. Chen, S. H. Dai, and T. S Lee, “Auxiliary Magnetic Repeater-Aided Dual-Output Wireless Charging with Coupling Analysis and Power Transfer Capability Consideration”, IEEE 45th Annual Conference of Industrial Electronics, IECON 2019, Lisbon, Portugal, October 2019, pp. 3450-3455.
  26. Y. C. Chang, S. J. Huang, T. S. Lee, and Y. J. Wang, “Design and Enhancement of Hexagon Coil Architecture for All-Surface Induction Heating”, Proceedings of the 40th Symposium on Electrical Power Engineering, Taiwan, September 2019, pp. 215.1-215.6.
  27. Y. H. Liao, S. J. Huang, and W. F. Su, “Application of Emperor Penguins Algorithm to Maintenance Scheduling of Distribution Transformers”, Proceedings of the 40th Symposium on Electrical Power Engineering, Taiwan, September 2019, pp.213.1-213.6.
  28. S. J. Huang, J. Y. Chen, T. S. Lee, and M. J. Wu, “Efficiency Enhancement and Coupling Analysis for Planar WPT System with CC/CV Output Mechanism Via a Modified Repeating-Coil”, Proceedings of the 40th Symposium on Electrical Power Engineering, Taiwan, September 2019, pp.118.1-118.6.
  29. S. J. Huang, M. J. Wu, T. S. Lee, and J. Y. Chen, “Wireless Charging System with Constant Current and Constant Voltage Output Capability Using Dual Resonance Frequency Modulation Mechanism”, Proceedings of the 40th Symposium on Electrical Power Engineering, Taiwan, September 2019, pp. 22.1-22.6.
  30. S. J. Huang, H. Y. Lin, C. H. Wu, and Y. H. Liao, “Application of Joint Operations Algorithm on Energy-Storage Equipment Siting and Capacity Adjustment”, Proceedings of the 39th Symposium on Electrical Power Engineering, Taiwan, December 2018, pp. 86.1-86.6.
  31. S. J. Huang, C. H. Wu, H. Y. Lin, and Y. H. Liao, “Energy-Storage Planning and Scheduling under Grid-Connected Photovoltaic Generations with Bat Foraging Algorithm Applications”, Proceedings of the 39th Symposium on Electrical Power Engineering, Taiwan, December 2018, pp. 87.1-87.6.
  32. C. Y. Lin and S. J. Huang, “Feasibility Study of Deep-Learning Techniques Applied for Placement of Static Synchronous Compensator Connected to Electric Power Grid”, Proceedings of the 39th Symposium on Electrical Power Engineering, Taiwan, December 2018, pp. 248.1-248.5.
  33. C. F. Tsai, S. J. Huang, K. C. Huang, and T. C. Hung, ”Development of Switching Techniques for Transformerless Circuits with Bidirectional Energy Transmission Capability”, Proceedings of the 39th Symposium on Electrical Power Engineering, Taiwan, December 2018, pp. 126.1-126.5.
  34. S. J. Huang, Y. T. Lin, T. S. Lee, J. L. Su, and C. J. Hsu, “Analysis and Implementation of Mutual Coupling Characteristics with Coaxial Coils for Wireless Power Transfer System”, Proceedings of the 15th Symposium on Power Electronics, Taiwan, September 2018, pp.531-536.
  35. S. J. Huang, J. L. You, T. S. Lee, J. L. Su, and D. M. Wang, “Design and Enhancement of Dielectric-barrier Discharging Plasma Actuators with Simplified Winding Feedback Control Mechanism”, Proceedings of the 15th Symposium on Power Electronics, Taiwan, September 2018, pp. 29-34.
  36. S. J. Huang, Y. M. Yang, S. H. Dai, J. Y. Chen, and M. J. Wu, “Design and Implementation of Single-Output Wireless Power Transfer System with a Relay Coil”, Proceedings of the 15th Symposium on Power Electronics, Taiwan, September 2018, pp. 23-28.
  37. C. J. Hsu, S. J. Huang, J. L. You, Y. T. Lin, T. C. Hung, K. C. Huang, Y. J. Wang, and Y. C. Chang, Y. C. Lin, and T. S. Lee, “Circuit Design of Improved Full-Bridge Converters for Multiple Energy-Storage System Operations”, Proceedings of the 15th Symposium on Power Electronics, Taiwan, September 2018, pp. 779-783.
  38. Y. M. Yang, S. J. Huang, S. H. Dai, J. L. Su, and T. S. Lee, “Design and Implementation of Two-Transmitter-Two-Receiver Wireless Power Transfer System with Coupling Resonance Analysis”, Proceedings of the 38th Symposium on Electrical Power Engineering, Taiwan, December 2017, pp. 142.1-142.6.
  39. M. S. Huang, S. J. Huang, W. F. Su, H. Y. Lin, and C. H. Wu, “Planning and Dispatching of Energy-Storage Equipment with Suitability Study of Deep-Learning Guiding Techniques”, Proceedings of the 38th Symposium on Electrical Power Engineering, Taiwan, December 2017, pp. 264.1-264.5.
  40. K. C. Huang, S. J. Huang, C. J. Hsu, and J. L. You, “Design and Realization of Portable Ozone-Driven System with Reduced Input-Voltage Operation Capability”, Proceedings of the 38th Symposium on Electrical Power Engineering, Taiwan, December 2017, pp. 216.1-216.5.
  41. S. J. Huang, J. L. Su, S. H. Dai, C. C. Tai, and T. S. Lee, “Enhancement of Wireless Power Transmission with Foreign-Object Detection Considerations”, IEEE 6th Global Conference on Consumer Electronics, Nagoya, Japan, October 2017, pp. 191-192.
  42. S. J. Huang, S. H. Dai, J. L. Su, and T. S. Lee, “Design of a Contactless Power Supply System with Dual Output Capability for AGV Applications”', IEEE 6th Global Conference on Consumer Electronics, Nagoya, Japan, October 2017, pp. 195-197.
  43. S. J. Huang, D. M. Wang, C. C. Chen, T. S. Lee, and Y. R. Lin, “Enhancement of Magnetron-Driven System with Simple Preheating and Power Modulation Mechanism”, IEEE 6th Global Conference on Consumer Electronics, Nagoya, Japan, October 2017, pp. 592-594.
  44. P. S. Chiu, S. J. Huang, W. F. Su, K. T. Wu, and C. J. Hsu, “An Intelligent Maintenance Scheduling of Distribution Transformers in a Smart Grid”, IEEE 6th Global Conference on Consumer Electronics, Nagoya, Japan, October 2017, pp. 718-719.
  45. T. S. Lee S. J. Huang, Y. C. Lin, Y. H. Tsai, and D. M. Wang, “Design and Realization of Portable DC Energy Storage with High Output-Current Capability”, Proceedings of the 37th Symposium on Electrical Power Engineering, Taiwan, December 2016, pp. 296.1-296.5.
  46. C. C. Wei, S. J. Huang, M. S. Huang, W. F. Su, C. Y. Chang, and K. C. Huang, “Feasibility of Energy-Storage Equipment Scheduling with Algorithm-Aided Planning in a Power System”, Proceedings of the 37th Symposium on Electrical Power Engineering, Taiwan, December 2016, pp. 279.1-279.5.
  47. S. J. Huang, Y. C. Lin, and T. S. Lee, “Implementation and Enhancement of Magnetic Resonance Power Transfer Systems with Multi-Coil Transmission Mechanism and Coupled-Mode Technique”, Proceedings of the 14th Symposium on Power Electronics, Taiwan, September 2016, pp. A41-A46.
  48. C. C. Chen, S. J. Huang, T. S. Lee, Y. R. Lin, and Y. H. Tsai, “Analysis of Magnetron-Driven Systems Integrated with Multi-Winding”, Proceedings of the 14th Symposium on Power Electronics, Taiwan, September 2016, pp. A87-A92.
  49. T. E Lee, T. H. Huang, S. J. Huang, C. C. Tai, Y. R. Lin, T. S. Lee, T. C. Hong, J. L. Kuo, and Z. M. Hung, “Implementation and Enhancement of Induction Power Transfer System with Large Coil-Misalignment Capability using A Novel Transmitter Structure for EVs”, Proceedings of the 14th Symposium on Power Electronics, Taiwan, September 2016, pp. C1-C6.
  50. S. J. Huang, P. J. Chiang, T. S. Lee, and W. F. Su, “Enhancement of Ozone-Generation with Modular Expansions and Dual-Drive Systems,” IEEE International Symposium on Circuits and Systems, Montreal, Canada, May 2016, pp. 209-212.
  51. S. J. Huang, T. Y. Tai, W. F. Su, X. Z. Liu, K. T. Wu, and H. Y. Su, “A Preliminary Study on Impact Analysis of Grid-Connected PV Systems Considering Additional Transformer Installations,” IEEE International Symposium on Circuits and Systems, Montreal, Canada, May 2016, pp. 1182-1185
  52. S. J. Huang, P. Y. Wen, T. C. Hung, and Y. R. Lin, “Converter Design for Fuel Cells Enhanced with Cooperation of Lithium Batteries and Supercapacitors,” IEEE International Symposium on Circuits and Systems, Montreal, Canada, May 2016, pp. 1638-1641.
  53. T. S. Lee, S. J. Huang, and P. J. Chiang, “Design and Application of Miniature Air Purifiers with Flexible Capacity Expansion Capability Enhancement”, Proceedings of 2016 Intelligent Living Technology Conference, Taiwan, June 2016, pp. 607-613.
  54. T. S. Lee, S. J. Huang, and Y. C. Lin, “Design of Larger Distance Wireless Power Transmission System with Frequency Modulation Technique for Smart Home Appliances”, Proceedings of 2016 Intelligent Living Technology Conference, Taiwan, June 2016, pp. 572-578.
  55. P. Y. Wen, S. J. Huang, Y. R. Lin, T. S. Lee, and T. C. Hung, “Realization of DC Power with Multiple Sources for Home Living”, Proceedings of 2016 Intelligent Living Technology Conference, Taiwan, June 2016, pp. 176-182.
  56. S. J. Huang, Y. C. Lin, and T. S. Lee, “Design and Analysis of Secondary Coil Coupling for Magnetic Resonance Energy Transfer with Circuit Realization”, Proceedings of the 36th Symposium on Electrical Power Engineering, Taiwan, December 2015, pp. 243.1-243.6.
  57. S. J. Huang, C. Y. Chang, C. C. Wei, W. F. Su, and H. Y. Su, “Application of Social Spider Algorithm to Generation Dispatch and Reactive Power Compensation including Clear Grid Considerations”, Proceedings of the 36th Symposium on Electrical Power Engineering, Taiwan, December 2015, pp. 490.1-490.6.
  58. T. E Lee, T. H. Huang, S. J. Huang, C. C. Tai, P. J. Chiang, W. H. Li, Y. C. Lin, T. S. Lee, and T. C. Hung, “Implementation of Protection and Feedback Control Mechanism for Magnetic Inductive Charging System on Electric Vehicles”, Proceedings of the 36th Symposium on Electrical Power Engineering, Taiwan, December 2015, pp. 163.1-163.6.
  59. S. J. Huang, C. H. Hsieh, X. Z. Liu, and Y. C. Lin, “Feasibility Study of Signal Detection for Early Warning of Supercapacitor Aging”, Proceedings of the 36th Symposium on Electrical Power Engineering, Taiwan, December 2015, pp. 418.1-418.5.
  60. P. Y. Wen, S. J. Huang, K. C Huang, and S. Y. Liu, “Design and Realization of Integrated Converter Circuit Applied for A Multi-Power Source System”, Proceedings of the 36th Symposium on Electrical Power Engineering, Taiwan, December 2015, pp. 214.1-214.6.
  61. P. J. Chiang, K. C. Huang, S. J. Huang, and T. S. Lee, “Circuit Realization and Performance Improvement of Ozone Generation Systems Using Two-Terminal Driving Approaches”, International Conference on Green Energy Technology and Management, Taiwan, June 2015, pp. 1-5.
  62. T. E. Lee, S. J. Huang, C. C. Tai, C. J. Chang, W. H. Li, B. F. Cai, P. J. Chiang, and Y. C. Lin, “Design and Analysis of Induction Coil Module for Plugless Charging System in Electric Vehicles”, International Conference on Green Energy Technology and Management, Taiwan, June 2015, pp. 220-224.
  63. S. Y. Liu, S. J. Huang, P. Y. Wen, and K. C. Huang, “Design of an Integrated DC Converter for Power Supplies of Fuel Cells and Supercapacitors”, Proceedings of 2015 Intelligent Living Technology Conference, Taiwan, June 2015, pp. 137-142.
  64. S. J. Huang, W. F. Su, X. Z. Liu, and K. T. Wu, “Application of Forest Optimization Algorithm to Placement Planning of Distributed Resources and Capacitors”, Proceedings of 2015 Intelligent Living Technology Conference, Taiwan, June 2015, pp. 148-153.
  65. S. J. Huang, T. S. Lee, R. Y. Chen, and Y. H. Yeh, “Application of Hybrid-Loop Control Approach to Inverter Design with Piezoelectric Transducers,” IEEE International Conference on Industrial Technology, ICIT2015, Sevilla, Spain, March 2015, pp. 935-940.
  66. S. J. Huang, T. C. Hung, and S. Y. Liu, “Combination of Class E Inverters with DC-DC Converters for a Circuit Design with Controllable Dual Outputs,” IEEE International Conference on Industrial Technology, ICIT2015, Sevilla, Spain, March 2015, pp. 957-962.
  67. T. S. Lee, S. J. Huang, C. C. Tai, R. Y. Chen, and B. R. Jiang, “Design of Wireless Power Transfer for Dynamic Power Transmission with Position-Detection Mechanism”, IEEE International Conference on Industrial Technology, ICIT2015, Sevilla, Spain, March 2015, pp. 976-981.
  68. S. J. Huang, T. Y. Tai, X. Z. Liu, W. F. Su, and P. H. Gu, “Application of Bird-Mating Optimization to Phase Adjustment of Open-Wye/Open-Delta Transformers in a Power Grid,” IEEE International Conference on Industrial Technology, ICIT2015, Sevilla, Spain, March 2015, pp. 1275-1279.
  69. S. J. Huang, P. H. Gu, W. F. Su, X. Z. Liu, T. Y. Tai, “Application of Flower Pollination Algorithm for Placement of Distribution Transformers in A Low-Voltage Grid,” IEEE International Conference on Industrial Technology, ICIT2015, Sevilla, Spain, March 2015, pp. 1280-1285.
  70. S. J. Huang, R. Y. Chen, T. S. Lee, and B. R. Jiang, “Development of Inductive Power Transfer Platform for Mobile Equipment with Pickup Position Detection Capability”, Proceedings of the 35th Symposium on Electrical Power Engineering, Taiwan, December 2014, pp. 417.1-417.6.
  71. S. J. Huang, C. Y. Chang, X. Z. Liu, W. F. Su, and J. T. Lin, “Feasibility Analysis of Applying Krill Herd Algorithm to Superconductor Power Cables Placement”, Proceedings of the 35th Symposium on Electrical Power Engineering, Taiwan, December 2014, pp. 415.1-415.6.
  72. S. J. Huang, R. Y. Chen, W. H. Li, and T. S. Lee, “Realization of Protection and Control of Contactless Power Inverters Aided by a Single Feedback Signal,”, Proceedings of the 35th Symposium on Electrical Power Engineering, Taiwan, December 2014, pp. 422.1-422.6.
  73. C. H. Lee, S. J. Huang, C. Y. Wang, T. S. Lee, and T. C. Huang, and Y. C. Wang, “Performance Improvement of Contactless Power Transfer Circuit with Enhanced Magnetic Induction Coil Design Approaches”, Proceedings of the 35th Symposium on Electrical Power Engineering, Taiwan, December 2014, pp. 133.1-133.6.
  74. C. T. Hsieh, S. J. Huang, Y. C. Lin, and P. Y. Wun, “Realization of Microcontroller and Load Measurement with an Improved Frequency Estimation Method”, Proceedings of the 35th Symposium on Electrical Power Engineering, Taiwan, December 2014, pp. 409.1-409.6.
  75. C. W. Chang, S. J. Huang, C. Y. Wang, C. H. Li, R. Y. Chen, Y. H. Yeh, T. S. Lee, and T. C. Hung, “Design of Inductive Coils Platform for Wireless Power Transfer of Electric Vehicles”, Proceedings of the 13th Symposium on Power Electronics, Taiwan, September 2014, pp. 234-239.
  76. S. J. Huang, S. Y. Liu, C. W. Lin, and T. C. Hung, “Design of an Integrated Class E Inverter for Electric Scooter Chargers”, Proceedings of the 13th Symposium on Power Electronics, Taiwan, September 2014, pp. 370-374.
  77. S. J. Huang, X. Z. Liu, W. F. Su, S. C. Tsai, and C. M. Liao, “Application of Wolf Group Hierarchy Optimization Algorithm to Fault Section Estimation in Power Systems”, IEEE International Symposium on Circuits and Systems, ISCAS2014, Melbourne, Australia, June 2014, pp. 1163-1166.
  78. S. J. Huang, C. W. Lin, and T. C. Hung, “Analysis and Implementation of LLC Inverters for Ozone-Driven System with Constant-Current Control”, IEEE International Symposium on Circuits and Systems, ISCAS2014, Melbourne, Australia, June 2014, pp. 2433-2436.
  79. F. S. Pai, S. J. Huang, C. W. Ku, Y. R. Chen, B. G. Huang, and Y. C. Lin, “Voltage Equalization of Lithium Iron Phosphate Batteries Cooperating with Supercapacitors”, IEEE International Symposium on Circuits and Systems, ISCAS2014, Melbourne, Australia, June 2014, pp. 618-621.
  80. S. J. Huang, C. Y. Wang, T. S. Lee, R. Y. Chen, and C. H. Li, “Design and Analysis of Enhanced Coils for Contactless Charging Platform with USB Interface Applications”, Proceedings of 2014 Intelligent Living Technology Conference, Taiwan, June 2014, pp.213-218.
  81. C. T. Hsieh, S. J. Huang, and Y. C. Lin, “Improvement of Power Frequency Estimation via a Modified Algorithm”, Proceedings of 2014 Intelligent Living Technology Conference, Taiwan, June 2014, pp.181-186.
  82. S. J. Huang, P. H. Gu, W. F. Su, X. Z. Liu, and T. Y. Tai, “Application of Flower Pollination Algorithm for Distribution Transformer Site Planning in Low-Voltage Networks”, Proceedings of 2014 Intelligent Living Technology Conference, Taiwan, June 2014, pp.168-174.
  83. S. J. Huang, T. Y. Tai, X. Z. Liu, W. F. Su, and P. H. Gu, “Enhancement of Grid Control and Planning of Adjustable Equipment Using Dolphin Echolocation Algorithm”, Proceedings of 2014 Intelligent Living Technology Conference, Taiwan, June 2014, pp.146-152.
  84. X. Z Liu, S. J. Huang, and S. C. Tsai, “Application of Enhanced Imperialist Competitive Algorithm to Capacitor Placement of Unbalanced Radial Distribution Systems”, Proceedings of the 34th Symposium on Electrical Power Engineering, Taiwan, December 2013, pp. 692-698.
  85. T. C. Hung, S. J. Huang, C. W. Lin, S. Y. Liu, and C. H. Li, “Design and Implementation of Plasma-Driven Circuit with Symmetrical Pulse Power-Supplying Systems”, Proceedings of the 34th Symposium on Electrical Power Engineering, Taiwan, December 2013, pp. 972-976.
  86. S. J. Huang, C. W. Lin, T. C. Hung, and R. Y. Chen, “Design and Implementation of LLC Inverter for Ozone-Load Drive System”, Proceedings of the 34th Symposium on Electrical Power Engineering, Taiwan, December 2013, pp. 351-356.
  87. S. J. Huang, F. S. Pai, Y. R. Chen, B. G. Huang, and X. Z. Liu, “A Nonlinear Model of Parameter Formulation and Energy Estimation for Supercapacitors”, Proceedings of the 34th Symposium on Electrical Power Engineering, Taiwan, December 2013, pp. 536-541.
  88. X. Z. Liu, S. J. Huang, W. F. Su, C. M. Liao, P. H. Gu, C. W. Li, “Application of Harmony Search Algorithm to Service Restoration with Load Curtailment Considerations”, Proceedings of the 34th Symposium on Electrical Power Engineering, Taiwan, December 2013, pp. 340-344.
  89. T. S. Lee, S. J. Huang, R. Y. Chen, Y. H. Yeh, and C. W. Lin, “Realization and Performance Improvement of a Piezoelectric Transducers-Driven Circuit Aided with Phase-Tracking Control Approaches”, Proceedings of the 12th Symposium on Power Electronics, Taiwan, November 2013, pp. 57-62.
  90. C. W. Chiang, C. Y. Hsieh, S. J. Huang, R. Y. Chen, C. W. Lin, Y. H. Yeh, and T. S. Lee, “Design of a Wireless Power Transfer Prototype for Electronic Devices of Vehicles”, Proceedings of the 12th Symposium on Power Electronics, Taiwan, November 2013, pp. 63-68.
  91. S. J. Huang, T. S. Lee, T. H. Huang, and R. Y. Chen, “Implementation of Portable Constant-Power Ozone Generation Circuit Design”, Proceedings of 2013 Intelligent Living Technology Conference, Taiwan, June 2013, pp. 1024-1029.
  92. S. J. Huang, W. F. Su, T. C. Ou, X. Z. Liu, C. M. Liao, and C. W. Lin, “Application of Improved Gravitational Search Algorithm to Service Restoration of Priority Customers in Smart Microgrid”, Proceedings of 2013 Intelligent Living Technology Conference, Taiwan, June 2013, pp. 1083-1089.
  93. S. J. Huang, Y. J. Li, B. G. Huang, T. H. Huang, and T. S. Lee, ”Contactless Energy-Transfer System Design for Lithium Iron Phosphate Battery-Charging Circuits”, International Conference on Power Electronics and Drive Systems, Kitakyushu, Japan, April 2013, pp. 217-220.
  94. S. J. Huang, T. S. Lee, F. S. Pai, and T. H. Huang, “Method of Feedback Detection for Loosely Coupled Inductive Power Transfer System with Frequency-Tracking Mechanism”, International Conference on Power Electronics and Drive Systems, Kitakyushu, Japan, April 2013, pp. 784-787.
  95. F. S. Pai, S. J. Huang, and T. S. Lee, “Design of a PT-Based Resonant Inverter for Ozone Generation with Flexible Capacity Operations”, International Conference on Power Electronics and Drive Systems, Kitakyushu, Japan, April 2013, pp. 1241-1244.
  96. S. J. Huang, X. Z. Liu, and S. C. Tsai, “Application of Imperialist Competitive Algorithm for Decision-Making of Capacitor Placement in Distribution Systems”, Proceedings of the 33rd Symposium on Electrical Power Engineering, Taiwan, December 2012, pp. 1091-1096.
  97. S. J. Huang, T. H. Huang, T. S. Lee, and R. Y. Chen, “Design and Implementation of a Contactless Energy Transmission System with Power Tracking Function Embedded”, Proceedings of the 33rd Symposium on Electrical Power Engineering, Taiwan, December 2012, pp. 733-739.
  98. S. J. Huang, C. W. Hsieh, H. H. Wan, and H. F. Lee, “Power Flow Analysis of Closed-Loop Distribution Network and Un-Interrupted Load Transfer Study”, Proceedings of the 33rd Symposium on Electrical Power Engineering, Taiwan, December 2012, pp. 1223-1227.
  99. S. J. Huang, F. S. Pai, B. G. Huang, C. W. Ku, and Y. R. Chen, “Prototype Design and Implement of Li-ion Battery Energy Recovery Systems”, Proceedings of the 33rd Symposium on Electrical Power Engineering, Taiwan, December 2012, pp. 707-712.
  100. S. J. Huang, F. S. Pai, B. G. Huang, and Y. R. Chen, “An Integrated Approach of Parameter Formulation and Modeling Analysis of Ultracapacitors”, Proceedings of the 33rd Symposium on Electrical Power Engineering, Taiwan, December 2012, pp. 434-440.
  101. S. J. Huang, C. W. Lin, W. F. Su, X. Z. Liu, and C. M. Liao, “Application of Bat Foraging Algorithm for Fault Section Identification in Power Systems”, Proceedings of the 33rd Symposium on Electrical Power Engineering, Taiwan, December 2012, pp. 599-604.
  102. S. J. Huang, T. S. Lee, and C. T. Hsieh, “Design of a Wireless Power Transfer for Contactless Charging System Using Bio-Inspired Algorithm”, International Conference on Innovations in Bio-Inspired Computing and Applications, IBICA 2012, Taiwan, September 2012, pp. 189-194.
  103. T. C. Hung, S. J. Huang, F. S. Pai, and C. W. Ku, “Design of Lithium-Ion Battery Charging System Enhanced with Wolf Pack Algorithm”, International Conference on Innovations in Bio-Inspired Computing and Applications, IBICA 2012, Taiwan, September 2012, pp. 195-200.
  104. S. J. Huang, F. S. Pai, K. C. Huang, and S. F. Wen, “Realization of Internet-of-Things Concept to Personal Workspace Energy-Saving Applications”, Proceedings of 2012 Intelligent Living Technology Conference, Taiwan, June 2012, pp. 1481-1485.
  105. S. J. Huang, T. S. Lee, and T. H. Huang, “A Prototype Design and Study of Enhanced Contactless Energy Charging Platform”, Proceedings of 2012 Intelligent Living Technology Conference, Taiwan, June 2012, pp. 1492-1497.
  106. S. J. Huang, C. W. Hsieh, and H. F. Lee, “Early Detection of Abnormal Battery Operation in Battery Packs”, Proceedings of 2012 Intelligent Living Technology Conference, Taiwan, June 2012, pp. 1498-1501.
  107. S. J. Huang, F. S. Pai, C.W. Ku, and K. C. Huang, “Design and Realization of Energy-Charging Monitoring and Protection Function Enhanced by Wireless Sensor Networks”, Proceedings of 2012 Intelligent Living Technology Conference, Taiwan, June 2012, pp. 1470-1475.
  108. C. C. Chen, C. C. Tai, and S. J. Huang, “New Designed Ferrite Cored Applicator Coils for Liver Tumors Thermotherapeutic Needle”, Symposium on Engineering, Medicine and Biology Applications, Taiwan, February 2012, pp. 04-343.
  109. S. J. Huang, C. T. Hsieh, L. C. Kuo, C. W. Lin, C. W. Chang, and S. A. Fang, “Classification of Home Appliance Electricity Consumption Using Power Signature and Harmonic Features”, IEEE International Conference on Power Electronics and Drive Systems, Singapore, December 2011, pp. 596-599.
  110. S. J. Huang and T. S. Lee, “Enhancement of Piezoelectric Transformer-Based LED Lighting System with Tracking Mechanism” IEEE International Conference on Power Electronics and Drive Systems, Singapore, December 2011, pp. 987-990.
  111. B. G. Huang, F. S. Pai, S. J. Huang, and Y. J. Li, Design of a Lithium-Iron Battery Charger with the Open-Circuit Voltage Function Evaluation”, IEEE International Conference on Power Electronics and Drive Systems, Singapore, December 2011, pp. 1080-1083.
  112. J. Y. Lee, S. J. Huang, and F. S. Pai, “Design of Plasma Power for an Atmospheric Pressure Dielectric Barrier Discharge”, IEEE International Conference on Power Electronics and Drive Systems, Singapore, December 2011, pp. 824-827.
  113. S. J. Huang and C. W. Hsieh, “Improvement of Distribution Feeders Voltage Estimation in a Power System”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 940-944.
  114. S. J. Huang, S. F. Wen, F. S. Pai, and S. A. Fang, “Application Mode Analysis and Feasibility Evaluation of Internet of Things Applied to Home Energy Management System”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 29-33.
  115. S. J. Huang, F. S. Pai, Y. J. Li, and B. G. Huang, “Design of a Contactless Li-Ion Battery Charging Circuit”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 69-74.
  116. S. J. Huang, C. M. Chen, C. T. Hsieh, and C. S. Tsai, “Design and Analysis of Hospital Water Supply to Pico Hydro Generation Study”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 207-210.
  117. S. J. Huang, W. F. Su, J. T. Lin, and C. W. Chang, “Feasibility Simulations and Analysis of High-Temperature Superconducting Cables and Superconducting Fault-Current Limiters”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 211-215.
  118. C. J. Huang, F. S. Pai, Y. F. Ou, S. J. Huang”, Design and Implementations of Unified Power Quality Conditioner at Demand Side”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 1016-1020.
  119. T. S. Lee, S. J. Huang, P. Y. Lin, and F. S. Pai, “Performance Improvement of LED Lighting System Using Resonance Current Correction-Aided Approaches”, Proceedings of the 32nd Symposium on Electrical Power Engineering, Taiwan, December 2011, pp. 1973-1977.
  120. S. J. Huang, J. S. Lin, and X. Z. Liu, “Improved Intelligent Water Drops Algorithm Applied for Reactive Dispatching Planning with Power Losses and Voltage Deviations Minimization Considerations”, Proceedings of 2011 Intelligent Living Technology Conference, Taiwan, June 2011, pp. 1463-1469.
  121. T. S. Lee, S. J. Huang, and P. Y. Lin, “Piezoelectric Transformer Control-Aided Automatic Frequency-Tuning for LED Lighting Design”, Proceedings of 2011 Intelligent Living Technology Conference, Taiwan, June 2011, pp. 1470-1476.
  122. S. J. Huang, F. S. Pai, C. H. Lin, J. S. Lin, C. W. Ku, and T. C. Hung, “Concept of Natural River Formulation Applied to Enhance Charging Performance”, Proceedings of 2011 Intelligent Living Technology Conference, Taiwan, June 2011, pp. 1592-1596.
  123. S. J. Huang and X. Z. Liu, “Fault Section Estimation in Power Systems Using Enhanced Immune Algorithm”, IEEE PES Power Systems Conference & Exhibition, Phoenix, USA, March 2011, pp. 1-6.
  124. S. J. Huang, X. Z. Liu, and S. A. Fang, “Feasibility Evaluation of Biogeography-Based Optimization Applied for Diagnosis of Power System Fault Sections”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 115-121.
  125. S. J. Huang, W. F. Su, C. W. Chang, X. Z. Liu, and T. C. Hung, “Application of Shuffled Frog Leaping Algorithm for Siting Planning of Arrestors”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 122-127.
  126. S. J. Huang, F. S. Pai, Y. J. Li, and B. G. Huang, ”Capacitor Compensation-Aided Contactless Power Transmission Design for Li-Ion Battery Charger Applications”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 166-172.
  127. S. J. Huang, J. S. Lin, and X. Z. Liu, “Application of Intelligent Water Drops Algorithm for Optimal Reactive Power Planning in Power Systems”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 173-178.
  128. S. J. Huang, S. A. Fang, Z. Y. Zhang, X. Z. Liu, and S. H. Yang, “Wireless Sensor Network-Aided for Electricity Load Supervision Enhancements”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 428-432.
  129. S. J. Huang, F. S. Pai, T.C. Hung, C. H. Lin, and C. Y. Hsieh, “Feasibility Study of Wolf Pack Algorithm Applied to Lithium-Ion Battery Charging Optimization”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 1738-1742.
  130. S. J. Huang, S. H. Yang, W. F. Su, X. Z. Liu, and P. Y. Lin, “Application of Firefly Algorithm for Sheath Losses Reduction of Underground Cables”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 1850-1856.
  131. S. J. Huang, P. C. Tang, and H. H. Wan, “Application of Phase Difference Analysis for Performance Enhancement of Partial Discharge Source Location in Power Transformers”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 1893-1898.
  132. T. S. Lee, S. J. Huang, P. Y. Lin, and F. S. Pai, “Analysis and Implementation of A Low-Frequency Cold Cathode Fluorescent Lamp Lighting System”, Proceedings of the 31st Symposium on Electrical Power Engineering, Taiwan, December 2010, pp. 1930-1935.
  133. S. J. Huang, F. S. Pai, and B. G. Huang, “A Matching Design for Ultra-Capacitor and Li-Ion Battery Cooperation in Electric Wheel Motors”, Annual Conference of the Society of Instrument and Control Engineers, SICE 2010, Taiwan, August 2010, pp. SA10.1-4.
  134. Y. L. Lin, S. J. Huang, and F. S. Pai, “Design and Realization of Constant Current Ultrasonic Oscillatory Systems with Automatic Frequency-Tracking Control,” Proceedings of 2010 Intelligent Living Technology Conference, Taiwan, June 2010.
  135. F. S. Pai, S. J. Huang, and Z. Y. Lin, “Design of Asymmetrical Pulse Power with Energy-Saving Applications to Plasma Loads”, Proceedings of 2010 Intelligent Living Technology Conference, Taiwan, June 2010.
  136. S. J. Huang, S. A. Fang, and X. Z. Liu, “Application of Wolf Pack Algorithm for Fault Section Diagnosis of Distribution Systems, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B014.1-6.
  137. D. M. Lin, W. F. Su, S. J. Huang, S. K. Peng, C. Cheng, W. Q. Zhang, C. W. Chen, X. H. Chen and Z. W. Zhang, “A Study on Circuit Arrester Placement and Flashover Rate Analysis of Electrical Power Transmission Lines”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B019.1-6.
  138. C. W. Chen, S. J. Huang, and W. C. Chang, “An Investigation of Magnetic Field Distribution of Overhead and Underground Transmission Lines with Pipeline Placement Considerations”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B012.1-5.
  139. F. C. Wang, S. J. Huang, and M. H. Du, “Application of Blocking Control of Protective Relays for Prevention and Avoidance of Transformer Inrush Currents”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B039.1-5.
  140. T. H. Wu, S. J. Huang, and S. H. Yang, “A Study of Intelligent Plug for Smart Home Appliance Applications”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B044.1-4.
  141. C. H. Hsieh, S. J. Huang, and K. C. Cheng, “Relation Analysis for Bus Potential Transformer Ferroresonance and Circuit Breaker Grading Capacitance”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B063.1-4.
  142. P. C. Tang, S. J. Huang, and H. H. Wan, “An Integrated Predictive Maintenance Strategy of Partial Discharge Measurement and Dissolved Gas Analysis”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B008.1-4.
  143. S. J. Huang and X. Z. Liu, “Decision Support of Capacitor Placement and Capacity Selection in Distribution Systems Using Plant Growth Simulation Algorithm”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B011.1-7.
  144. F. S. Pai, J. B. Pan, S. J. Huang, C. J. Huang, B. G. Huang, and Z. Y. Lin, “Design of Voltage Equalizer for Li-Ion Battery String with Super-Capacitors Connected”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. C027.1-5.
  145. S. J. Huang, Z. Y. Zhang, X. Z. Liu, S. H. Yang, and S. A. Fang, “A Study on Embedded Energy-Saving Supervision System Design with Demand Response Control”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B047.1-5.
  146. J. Y. Cheng, C. T. Hsieh, and S. J. Huang, “A Pseudo Wigner Distribution Method Applied for Electric Power Quality”, Proceedings of the 30th Symposium on Electrical Power Engineering, Taiwan, November 2009, pp. B048.1-5.
  147. F. S. Pai, S. J. Huang, Y. C. Lee, and Y. S. Huang, “Design and Realization of Resonant Inverters for Piezoelectric Transducer Systems”, Proceedings of the Eighth Symposium on Power Electronics, Taiwan, September 2009, pp. 610-614.
  148. F. S. Pai, S. J. Huang, C. L. Ou, and C. C. Huang, “Application of Asymmetrical Pulse Width Modulation for Plasma-Load Drive System Design”, Proceedings of the Eighth Symposium on Power Electronics, Taiwan, September 2009, pp. 615-619.
  149. S. J. Huang, P. K. Huang, and Y. J. Jhuang, “SVM-Enhanced Wavelet Packet Transform with Application to Electric Signal Monitoring”, Proceedings of 2009 Intelligent Living Technology Conference, Taiwan, June 2009.
  150. C. S. Tsai, S. J. Huang, and C. T. Hsieh, “Inspection Enhancement of Wind Turbine Blades Using Novel Signal-Processing Approaches”, IEEE International Power Systems Conference & Exposition, Seattle, USA, March 2009.
  151. S. J. Huang and X. Z. Liu, “Artificial Bee Colony Forage Algorithm Applied for Fault Section Diagnosis of Distribution System”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2078-2084, pp. 1-7.
  152. S. J. Huang and S. G. Lai, “Application of Marriage in Honey Bees Algorithm for Capacitor Placement in Radial Distribution Systems”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2125-2129.
  153. S. J. Huang, P. K. Huang, and Y. J. Jhuang, “Application of ZigBee Wireless Sensor Network with Support Vector Machine to Transformer Winding Short Detection”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2145-2150.
  154. S. J. Huang, N. T. Su, and X. Z. Liu, “Investigation of Line Loss Reduction by Modification of Street Lighting Systems”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2151-2157.
  155. F. S. Pai, S. J. Huang, J. S. Lin, and Y. S. Huang, “Design of Zero-Pole Compensation Control Loops and Its Realization in Dynamic Voltage Restorers”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 1789-1793.
  156. C. F. Hung, S. J. Huang, C. W. Hsieh, and C. C. Huang. “Investigation and Assessment of Hot Expansion and Contraction Effects on Installation of XLPE Power Cables”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 1983-1987.
  157. S. J. Huang, C. W. Hsieh, C. F. Hong, Z. M. Zheng, and W. F. SU, “Identification of Photovoltaic Generation Equipment in A Distribution System”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 1854-1858.
  158. P. C. Tang, S. J. Huang, C. C. Huang, and W. M. Wang, “A Study on Integrated Application of Ethernet for Embedded Demand Controllers”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 1762-1766.
  159. F. S. Pai, S. J. Huang, S. H. Wu, and C. L. Ou, “Half-Bridge Resonant Inverter Design for Plasma Load Drives Applications”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2204-2209.
  160. C. W. Hsieh, W. F. Su, S. J. Huang, X. Z. Liu, N. C. Wang, W. C. Chang, W. Y. Chang, S. C. Tsai and Y. S. Chang, “A Study of Equipment Maintenance and Cost Statistics in Distribution Systems”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 1711-1715.
  161. C. H. Hsieh, S. J. Huang, and X. Z. Liu, “Monitoring and Diagnosis of Leakage Current of Metal Zinc Oxide Arresters, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2429-2433.
  162. J. Y. Cheng, C. T. Hsieh, C. M. Huang, S. J. Huang, W. S. Lin, and C. J. Huang, “The Application of Parallel Virtual Machine for Power Quality Signals Analysis using Discrete Wavelet Transform”, Proceedings of the 29th Symposium on Electrical Power Engineering, Taiwan, December 2008, pp. 2283-2288.
  163. F. S. Pai, S. J. Huang, M. F. Hsieh, and C. M. Lin, “Design of Modular Inverter for Distributed Power Generation”, IEEE International Conference on Sustainable Energy Technologies, Singapore, November 2008, pp. 220-224.
  164. F. S. Pai, S. J. Huang, Y. H, Huang, “Modular Converter Design for Micro-turbine Applications”, Proceedings of the Seventh Symposium on Power Electronics, September 2008, Taiwan, pp. 183-187.
  165. S. J. Huang, F. H. Hsu, C. T. Hsieh, and C. M. Huang, “Systolic Array-Based Wavelet and Hilbert Transform Computations with Application to Electric Power Quality Monitoring”, Proceedings of 2008 Intelligent Living Technology Conference, Taiwan, June 2008.
  166. S. J. Huang and C. J. Wu, “Integration of Wireless Sensor Network with Solar Charge System for Electric Power Quality Monitoring Applications”, Proceedings of 2008 Intelligent Living Technology Conference, Taiwan0, June 2008.
  167. F. Y. Li, S. J. Huang, C. T. Hsieh, and C. C. Kuo, “Detection of Islanding Operations of Distributed Generations Using Wavelet Energy Entropy”, Proceedings of 2008 Intelligent Living Technology Conference, Taiwan, June 2008.
  168. S. J. Huang, Y. M. Chien, X. Z. Liu, and C. C. Hsiao, “Application of Bacterial Foraging Algorithm for Fault Section Estimation of Distribution Systems,” Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. D04.2_1-5.
  169. F. S. Pai, C. L. Huang, J. M. Lin, J. S. Lin, and S. J. Huang, “Flexible Capacity Design of Inverters Applied for Distributed Generation Systems”, Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. B10.6_1-5.
  170. J. M. Lin, H. Y. Pan, and S. J. Huang, “Multilayer Perceptron Applied for State Estimation and Bad Data Recognition in Power Systems,” Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. E09.6_1-5.
  171. S. J. Huang, F. Y. Li, J. M. Lin, and C. C. Kuo, “Active Islanding Detection of Distributed Generation Systems Including Feature Identification Enhancement and Signal Complexity Estimation,” Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. C10.3_1-5.
  172. C. T. Hsieh, S. J. Huang, C. C. Kuo, and F. Y. Li, “Integration of Approximate Entropy with Lempel-Ziv Method for Classification of Electrical Power Quality Signals,” Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. A07.1_1-5.
  173. S. J. Huang and H. H. Wan, “Marginal Spectrum Analysis and Its Application for Identification of Inrush Currents in Transformers,” Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. D04.5_1-5.
  174. C. H. Hsieh, S. J. Huang, and C. H. Hsieh, “Feasibility Assessment of Protection Scheme for Substation Blackout Avoidance”, Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. A05.3_1-5.
  175. S. J. Huang and C. J. Wu, “Wireless Sensor Network Embedded with Approximate Entropy Computation Algorithm for Voltage Variations Detection and Analysis”, Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. D15.6_1-5.
  176. S. J. Huang and P. K. Huang, “Integrated Image-Detection with Wireless Sensor Networks for Unmanned Substation Monitoring”, Proceedings of the 28th Symposium on Electrical Power Engineering, Taiwan, December 2007, pp. B04.3_1-5.
  177. S. J. Huang and J. M. Lin, “Monte Carlo Method-Based Clustering Analysis Applied for Robust Estimation and Data Debugging of Power Systems,” International Conference on Intelligent System Applications to Power Systems, November 2007, Taiwan.
  178. F. S. Pai, S. J. Huang, I. M. Chang, and S. H. Wu, “DC/AC Voltage Conversion Planning and Design for Lamp-Driven System Applications,” Proceedings of the Sixth Symposium on Power Electronics, September 2007, Taiwan, pp. 119-123.
  179. S. J. Huang, C. T. Hsieh, C. C. Kuo, and F. Y. Li, “Lempel-Ziv Based Method for Detection of Electrical Power Quality Signal Variations,” Proceedings of 2007 Intelligent Living Technology Conference, Taiwan, June 2007, pp. 48-52.
  180. S. J. Huang and P. K. Huang, “RFID-Based ZigBee Wireless Sensor Networks for Temperature Supervision of Electric Power Transformers,” Proceedings of 2007 Intelligent Living Technology Conference, Taiwan, June 2007, pp. 88-92.
  181. R. H. Wang, S. J. Huang, J. M. Lin, Y. M. Chen, “A Prototype Design for Electric Power Disturbance Signal Inspection Using Approximate Entropy Estimation Approaches,” Proceedings of 2007 Intelligent Living Technology Conference, Taiwan, June 2007, pp. 53-58.
  182. C. C. Lin and S. J. Huang, “Enhancement of Power System Communications between Campus via Real-Time Transport Protocol,” International Conference on Power and Energy Systems, Florida, USA, January 2007.
  183. C. C. Lin and S. J. Huang, “Feasibility Assessment of Path-Planning for Pipeline System Construction of Electric Utilities Network Enhancement,” International Conference on Power and Energy Systems, Florida, USA, January 2007.
  184. F. S. Pai, C. L. Huang, S. J. Huang, C. H. Hsieh, and J. M. Lin, “A Design of Universal Dynamic Voltage Restorers for Over-voltage and Under-voltage Supplying Scenarios,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. OF4.1_1-5.
  185. J. M. Lin, S. J. Huang, R. H. Wang, and S. H. Juang, “A Novel Approach Applied for Performance Enhancement of Power System Dynamic State Estimation,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PC1.7_1-5.
  186. J. M. Lin, C. L. Huang, S. J. Huang, S. H. Juang, “A FPGA-Embedded Realization of Economic Generation Scheduler in A Power System,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PB1.14_1-5.
  187. S. J. Huang, J. M. Lin, and R. H. Wang, “FPGA-Based Realization of Approximate Entropy for Electric Power Signal,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PD2.11_1-5.
  188. S. J. Huang and H. H. Wan, “Detection Improvement of High-Impedance Fault with Wavelet Transform Computation Enhancement,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. OE2.5_1-5.
  189. S. J. Huang, X. Z. Liu, and R. H. Liang, “Application of Improved Immune Algorithm for Fault Section Estimation of Distribution Systems,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. OF2.1_1-5.
  190. S. J. Huang, J. H. Wang, K. R. Shih, and C. B. Liang, “Feasibility Assessment of Signal Inspection for DC Drives Maintenance of a Steel Plant,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PD2.7_1-5.
  191. S. J. Huang and P. K. Huang, “Integration of Radio Frequency Identification Devices with Wireless Sensor Networks for Monitoring of Electric Power Equipment Temperatures,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PD2.6_1-5.
  192. S. J. Huang, C. H. Hsieh, and C. H. Hsieh, “Simulations and Feasible Strategy Analysis for Extreme Contingencies of Extra High Voltage Substations,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PD1.15_1-5.
  193. C. S. Tsai, C. T. Hsieh, and S. J. Huang, “Application of Time-Frequency Analysis to Structural Health Diagnosis of Wind Turbine Blades,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PD2.14_1-5.
  194. S. J. Huang, F. H. Hsu, and C. T. Hsieh, “Integration of Wavelet Computations with Hilbert Transform for Time-Frequency Analysis of Electric Power Signals,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PD2.15_1-5.
  195. S. J. Huang and C. C. Lin, “Application of WiMAX Communication Technique for Performance Enhancement of Feeder Monitoring in A Distribution System,” Proceedings of the 27th Symposium on Electrical Power Engineering, Taiwan, December 2006, pp. PB1.13_1-5.
  196. C. C. Lin, S. J. Huang, and M. J. Jou, “Enhancement of Remote Measurement Realization Using Bluetooth Wireless Transmission and Instrumentation Information Meta,” Proceedings of the 5th WSEAS Int. Conf. on Circuits, Systems, Electronics, Control & Signal Processing, Dallas, USA, November 2006, pp. 246-251.
  197. F. S. Pai, S. J. Huang, J. M. Lin, and J. W. Zeng, “Design of A Power Converter for Micro-Turbine Generation System,” Proceedings of the Fourth Symposium on Power Electronics, September 2006, Taiwan, pp. 986-991.
  198. F. S. Pai, S. J. Huang, C. H. Hsienh, J. M. Lin, and R. J. Rau, “A Design of Dynamic Voltage Restorer without Mains Transformer Connected,” Proceedings of the Fourth Symposium on Power Electronics, September 2006, Taiwan, pp. 847-851.
  199. S. J. Huang and P. Y. Chen, “Design of Two-Step A/D Converter with Improved Capacitor Interpolation Circuit,” Proceedings of 2006 Intelligent Living Technology Conference, Taiwan, June 2006, pp. ICD_R08_1-6.
  200. S. J. Huang, C. J. Chiang, J. Y. Huang, and W. Y. Hsu, “FPGA-Based Hardware Realization of S-Transform for Electric Power Quality Analysis,” Proceedings of 2006 Intelligent Living Technology Conference, Taiwan, June 2006, pp. IER_R06_1-7.
  201. S. J. Huang, J. Y. Huang, C. J. Chiang, and W. Y. Hsu, “A Prototype Design of Induction Motor Operating Maintenance System for Rolling Steel Factories,” Proceedings of 2006 Intelligent Living Technology Conference, Taiwan, June 2006, pp. IER_R05_1-7.
  202. S. J. Huang and P. K. Huang, “An Enhancement of Temperature Monitoring System for Electric Power Equipment via Radio Frequency Identification-Based Approaches,” Proceedings of 2006 Intelligent Living Technology Conference, Taiwan, June 2006, pp. IER_R02_1-6.
  203. J. M. Lin, S. J. Huang, and K. R. Shih, “A Study of Noise Filtering and Inspection Using Lifting Scheme Based Wavelet Transform,” Proceedings of 2006 Symposium on Chinese Institute of Automation Engineer, Taiwan, June 2006, pp. G07_1-6.
  204. J. M. Lin, S. J. Huang, C. H. Huang, and R. H. Wang, “Feasibility Assessment of Approximate Entropy Based Method for Disturbance Signal Inspection,” Proceedings of 2006 Symposium on Chinese Institute of Automation Engineer, Taiwan, June 2006, pp. G06_1-6.
  205. S. J. Huang, K. C. Hou, and W. Y. Hsu, “Application of Wavelet Transform to Enhance the Interface Design of Smartphone for Power Signal Monitoring,” Proceedings of the 26th Symposium on Electrical Power Engineering, Taiwan, December 2005, pp. 307-311.
  206. S. J. Huang and Y. J. Lee, “Evolutionary Programming Enhanced Support Vector Machines for State Identification of a Power System,” Proceedings of the 26th Symposium on Electrical Power Engineering, Taiwan, December 2005, pp. 529-534.
  207. M. H. Du, S. J. Huang, and F. C. Wang, “Integration of Embedded Controller with Intelligent Electronic Device for Remote Diagnosis of Distribution Power Systems,” Proceedings of the 26th Symposium on Electrical Power Engineering, Taiwan, December 2005, pp.535-539.
  208. C. C. Chen and S. J. Huang, “Digital Controller-Aided HVAC Energy-Savings of a Factory,” Proceedings of the 26th Symposium on Electrical Power Engineering, Taiwan, December 2005, pp. 1056-1060.
  209. C. S. Tsai, C. T. Hsieh, and S. J. Huang, “A Study on the Islanding Forewarning Detection System Design,” Proceedings of the 26th Symposium on Electrical Power Engineering, Taiwan, December 2005, pp. 1711-1715.
  210. S. J. Huang, C. H. Huang, C. R. Chiang, and R. Y. Huang, “Application of S Transform for Analysis Performance Enhancement of Electric Power Quality Signals,” Proceedings of the 26th Symposium on Electrical Power Engineering, Taiwan, December 2005, pp. 478-4482.
  211. S. J. Huang and L. T. Chan, “Embedded .NET Platform with Mobile Devices for Monitoring of Electric Energy Operations,” Symposium on Energy Science and Technology, November 2005, Taiwan, pp. 99-103.
  212. H. H. Wan and S. J. Huang, “Feasibility Investigation of Gray Relational Analysis Applied for the Assessment of Dissolved Gas of Oil-Filled Transformers,” Symposium on Energy Science and Technology, November 2005, Taiwan, pp. 130-133.
  213. Y. J. Lee, S. J. Huang, and J. M. Lin, “An Improved Support Vector Machine Applied for Data Validation of Energy Supply and Operation,” Symposium on Energy Science and Technology, November 2005, Taiwan, pp. 104-109.
  214. J. Y. Huang, S. J. Huang, F. S. Pai, W. Y. Hsu, C. J. Chiang, and Y. T. Chou, “Prototype Design of Smart Mobile Device for Monitoring of Distributed Generation Systems,” Symposium on Energy Science and Technology, November 2005, Taiwan, pp. 72-76.
  215. F. S. Pai, S. J. Huang, J. M. Lin, and J. W. Zeng, “Design of Utility Interface for the Micro-Turbine Generation System,” Symposium on Energy Science and Technology, November 2005, Taiwan, pp. 62-66.
  216. M. H. Du and S. J. Huang, “Integration of GSM Cellular Phone and Embedded Controller for the Remote Electric Power Supervision of Campus Substations,” 2005 Automatic Control Conference, Taiwan, November 2005, pp. d18.
  217. S. J. Huang, F. S. Pai, R. J. Rau, and C. H. Hsieh, “Capacity Expansion of Parallel Modular Design of Dynamic Voltage Restoration,” Proceedings of the Third Symposium on Power Electronics, September 2005, Taiwan, pp. 785-789.
  218. F. S. Pai, S. J. Huang, C. H. Hsieh, and T. S. Lee, “Bi-Directional DC-DC Converter Applied for Line-Interactive Uninterruptible Power Supplies,” Proceedings of the Third Symposium on Power Electronics, September 2005, Taiwan, pp. 835-839.
  219. S. J. Huang and C. H. Huang, “Application of Hilbert-Huang Transform for Time-Frequency Analysis of Electric Power Signals,” Proceedings of the 25th Symposium on Electrical Power Engineering, Taiwan, November 2004, pp. 1212-1216.
  220. S. J. Huang, C. L. Huang, F. S. Pai, T. S. Lee, R. J. Rau, and C. H. Hsieh, “Design of Line-Interactive UPS Enhanced with Harmonics Filtering Capability,” Proceedings of the 25th Symposium on Electrical Power Engineering, Taiwan, November 2004, pp.162-167.
  221. S. J. Huang and K. C. Hou, “A Prototype Design of Electric Power System Harmonics Monitoring under Smartphone Platform,” Proceedings of the 25th Symposium on Electrical Power Engineering, Taiwan, November 2004, pp.331-335.
  222. S. J. Huang and M. H. Du, “GSM Communication Applied for Distributed Electric Power Supervision,” Proceedings of the 25th Symposium on Electrical Power Engineering, Taiwan, November 2004, pp.446-451.
  223. W. K. Liu, S. J. Huang, C. C. Huang, and S. H. Yen, “Feasibility Assessment of Load Shedding Strategy Design via Area Control,” Proceedings of the 25th Symposium on Electrical Power Engineering, Taiwan, November 2004, pp.787-792.
  224. W. T. Hung and S. J. Huang, “Chip Design of Inverter-Controlled Home Air-Conditioned Appliances,” Proceedings of the 25th Symposium on Electrical Power Engineering, Taiwan, November 2004, pp.336-340.
  225. F. S. Pai, S. J. Huang, R. J. Rau, and T. S. Lee, “Design and Implementation of Series-type Automatic Voltage Regulators,” Proceedings of the Third Symposium on Power Electronics, September 2004, pp. 466-470.
  226. F. S. Pai, S. J. Huang, and T. S. Lee, “Design of an Energy-efficient Uninterruptible Power Supplier,” Proceedings of the 2004 Symposium on Energy Conservation, Taiwan, May 2004, pp. 144-152.
  227. S. J. Huang, T. S. Lee, C. J. Huang, F. S. Pai, and R. J. Rau, “Design of Power Supply Systems Integrated with Independent DC Generation Systems,” 2004 Automatic Control Conference, Taiwan, March 2004.
  228. S. J. Huang, W. K. Liu, and C. C. Huang, “Design and Assessment of Load Shedding Control Strategy of A Power System,” 2004 Automatic Control Conference, Taiwan, March 2004.
  229. C. H. Huang, S. J. Huang, and C. C. Huang, “ Application of Hilbert-Huang Transform for Time-Frequency Analysis of Disturbance Signals,” 2004 Automatic Control Conference, Taiwan, March 2004.
  230. W. Z. Lin, S. J. Huang, and J. M. Lin, “FPGA Realization of Slantlet Transform for Disturbance Inspection,” 2004 Automatic Control Conference, Taiwan, March 2004.
  231. S. J. Huang, C. Y. Huang, and G. C. Ho, “XML-Based SOAP Technology Applied for Cross-Platform Electric Power Quality Supervision,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp.1071-1075.
  232. F. S. Pai, S. J. Huang, C. J. Huang, T. S. Lee, and C. H. Sun, “Design and Implementation of On-Line Uninterruptible Power Supplies,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1839-1843.
  233. S. J. Huang, C. C. Lin, and M. J. Jou, “FPGA Prototyping of Power Flow Computation Chip,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1748-1752.
  234. J. M. Lin, S. J. Huang, K. N. Yu, and K. R. Shih, “Application of Changeable Weighting Matrix for Performance Enhancement of Static State Estimation of Power Systems,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1753-1757.
  235. S. J. Huang and C. W. Lu, “Performance Improvement of Voltage Flicker Measurement Via B-Spline Wavelet Transform Approach,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1367-1371.
  236. S. J. Huang, C. Y. Chen, C. L. Huang, and C. T. Hsieh, “Application of Wavelet Transform for Inrush Current Detection of Transformers,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1372-1376.
  237. S. J. Huang and W. H. Chao, “An Application of Wavelets Transform for the Identification of Sub-Synchronous Resonance in A Power System,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1567-1571.
  238. S. J. Huang and J. K. Wang, “Data Compression Applied for Monitoring Performance Enhancement of Electric Power Equipment,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp.1377-1381.
  239. S. J. Huang and J. M. Lin, “Slantlet Transform Method Applied for Islanding Inspection of Distributed Generation Systems,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 262-266.
  240. S. J. Huang, F. S. Pai, C. H. Sun, and T. S. Lee, “FPGA-Aided Line-interactive Uninterruptible Power Supplies,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 1834-1838.
  241. C. T. Hsieh, J. S. Tsai, S. J. Huang, W. M. Wang, and J. H. Hsieh, “Application of Wavelet Transform Approach to Supervise the Power System of Tainan Science-Based Industrial Park,” Proceedings of the 24th Symposium on Electrical Power Engineering, Taiwan, December 2003, pp. 6-10.
  242. S. J. Huang, C. H. Sun, and T. S. Lee, “FPGA Realization of Line-Interactive Power Uninterruptible Power Supply,” IEEE International Conference on Power Electronics and Drive Systems, Singapore, November 2003, pp. 376-379.
  243. S. J. Huang and J. M. Lin, “A Changeable Weighting Matrix Applied for State Estimation of Electric Power,” IEEE International Conference on Power Electronics and Drive Systems, Singapore, November 2003, pp. 873-876.
  244. S. J. Huang, F. S. Pai, T. S. Lee, and C. H. Sun, “Design and Implementation of Modified Line-Interactive Uninterruptible Power Supplies,” Proceedings of the Second Symposium on Power Electronics, Taiwan, September 2003, pp. 709-714.
  245. S. J. Huang, C. L. Huang, F. S. Pai, M. S. Huang, and R. J. Rau, “Hardware Realization of Digital Controllers of Single-Phase Power Factor Corrector,” Proceedings of the Second Symposium on Power Electronics, Taiwan, September 2003, pp. 494-499.
  246. S. J. Huang and J. M. Lin, “A Novel Algorithm for Power System Prediction-Based State Estimation,” IEEE PES General Meeting, Toronto, Canada, July 2003, pp. 747-751.
  247. S. J. Huang and J. M. Lin, “Application of Box Counting Method Based Fractal Geometry for Disturbance Detection in Power Systems,” IEEE PES General Meeting, Toronto, Canada, July 2003, pp. 1604-1608.
  248. S. J. Huang, C. H. Hsiao, and M. J. Jou, “Instrument Information Meta Language-Embedded Mobile Appliance and Realization of Home Networking,” 2003 Automatic Control Conference and Bio-Mechatronics System Applications, Taiwan, March 2003, pp. 695-700.
  249. C. T. Hsieh and S. J. Huang, “Slantlet Transform Approach Applied for the Detection of High-Impedance Fault,” 2003 Automatic Control Conference and Bio-Mechatronics System Applications, Taiwan, March 2003, pp. 2051-2056.
  250. S. J. Huang and J. M. Lin, “Performance Assessment of a Novel Method for Static State Estimation and Bad Data Identification,” 2003 Automatic Control Conference and Bio-Mechatronics System Applications, Taiwan, March 2003, pp. 2035-2040.
  251. J. M. Lin, S. J. Huang, K. R. Shih, and Y. J. Lai, “Box Counting Method-Based Fractal Geometry Technique for Disturbance Detection in Power Systems,” 2003 Automatic Control Conference and Bio-Mechatronics System Applications, Taiwan, March 2003, pp. 2064-2069.
  252. S. J. Huang, J. M. Lin, and Y. J. Lai, “Feasibility Assessment for FPGA Hardware Realization of Fractal Technique,” 2003 Automatic Control Conference and Bio-Mechatronics System Control and Applications, Taiwan, March 2003, pp. 1852-1857.
  253. S. J. Huang, C. J. Huang, F. S. Pai, C. H. Sun, and T. S. Lee, “Novel Design and Implementation of Line-interactive Uninterruptible Power Supplies,” 2003 Automatic Control Conference and Bio-Mechatronics System Control and Applications, Taiwan, March 2003, pp. 1734-1739.
  254. S. J. Huang and C. W. Lu, “An Application of B-Spline Wavelet Transform for Spike and Notch Detection,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 1184-1188.
  255. S. J. Huang and C. Y. Huang, “Enhancement of Power Signal Monitoring Using SOAP,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 1310-1314.
  256. S. J. Huang, C. J. Huang, F. S. Pai, and M. H. Huang, “Power Factor Corrector Design Utilizing Field Programmable Gate Array,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 1189-1193.
  257. F. S. Pai, S. J. Huang, C. H. Sun, and T. H. Lee, “FPGA-Aided DC-to-AC Converter for Uninterruptible Power Supplies, Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 1179-1182.
  258. S. J. Huang and J. M. Lin, “Application of Discrete Wavelet Transform for Islanding Detection of Distributed Generation Systems,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 1174-1178.
  259. S. J. Huang, K. R. Shih, and J. M. Lin, “Fractal-Enhanced Partitioned Clustering Method Applied for Load Characteristics Identification,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 1061-1065.
  260. S. J. Hung, C. C. Lin, C. H. Hsiao, and M. J. Jou, ”Feasibility Assessment on the Application of Asymmetric Digital Subscriber Line in Power Communication System,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 942-946.
  261. S. J. Huang, C. L. Huang, F. S. Pai, and C. M. Wu, “Circuit Design of Single-Phase Dynamic Voltage Restorer via Field Programmable Gate Array,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 299-303.
  262. S. J. Hung, C. C. Lin, M. J. Jou, and C. H. Hsiao, “Embodiment of Bluetooth Wireless Technique into Digital Measurement and Instrumentation,” Proceedings of the 23rd Symposium on Electrical Power Engineering, Taiwan, December 2002, pp. 937-941.
  263. S. J. Huang, C. C. Lin, C. H. Hsiao, and M. J. Jou, “A PDA-Supported System for Access Point Layout in Wireless Networks,” National Symposium on Telecommunication, Taiwan, December 2002.
  264. S. J. Huang, C. C. Lin, M. J. Jou, C. H. Hsiao, Y. C. Lin, and C. C. Wu, “An Application of Approximated Shortest Path Algorithm for the Management in Telecommunication Networks,” National Symposium on Telecommunication, Taiwan, December 2002.
  265. K. R. Shih, S. J. Huang, and J. M. Lin, “Integration of Gap Statistical Method with Fractal Theory for K-means Computation,” Seventh Conference on Artificial Intelligence and Applications, Taiwan, November 2002, pp. 119-124.
  266. S. J. Huang and J. M. Lin, “Artificial Neural Network Enhanced by Gap Statistic Algorithm Applied for Bad Data Detection of A Power System,” IEEE Transmission and Distribution Conference, Yokohama, Tokyo, October 2002, pp. 764-768.
  267. S. J. Huang and C. W. Lu, “Estimation of Stochastic Characteristics of an AC Electric Arc Furnace,” IEEE Transmission and Distribution Conference, Yokohama, Tokyo, October 2002, pp. 2073-2077.
  268. F. S. Pai and S. J. Huang, “A Detection Algorithm for Islanding-Prevention of Dispersed Consumer-Owned Storage and Generating Units,” IEEE PES Summer Meeting, Chicago, USA, July 2002, pp.27-31.
  269. S. J. Huang and F. S. Pai, “A New Approach of Circulating Current Method for UPS Testing with Energy Recovery,” IEEE PES Summer Meeting, Chicago, USA, July 2002, pp.1418-1422.
  270. S. J. Huang, J. M. Lin, and K. R. Shih, “Enhancement of Anomaly Detection and Identification in Dynamic State Estimation,” Automatic Control Conference, Taiwan, March 2002, pp. 1086-1091.
  271. S. J. Huang, J. C. Wu, and S. E. Hung, “Implementation of Active Power Filter via FPGA-Based Controller Circuit Design,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1528-1532.
  272. S. J. Huang, F. S. Pai, and T. S. Chiu, “Implementation of Electric Load Simulators with Energy Recovery Function Embedded,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1160-1164.
  273. S. J. Huang and C. W. Lu, “Feasibility Assessment of Gaussian Wavelet Transform Applied for Power Factor Measurement,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1380- 1384.
  274. S. J. Huang, C. L. Huang, F. S. Pai, and C. M. Wu, “Novel Design of Dynamic Voltage Restorer with Universal Filtering Capability,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1165-1169.
  275. S. J. Huang, P. S. Tseng, and C. S. Hung, “An Implementation of Electric Power Quality Analysis Using PDA Virtual Instrument,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1366-1370.
  276. S. J. Huang, J. J. Lin, and K. R. Shih, “Application of Complex Kalman Filter for Dynamic State Estimation of Power System Harmonics,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1351-1355.
  277. S. J. Huang, P. S. Tseng, and C. Y. Huang, “Portability Enhancement of Electric Power Quality Analysis Using Web-Based Virtual Instrument,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 1346-1350.
  278. K. R. Shih, S. J. Huang, and J. M. Lin, “Identification of Load Characteristics Using Partitioned Clustering and Bispectrum Analysis,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 576-580.
  279. S. J. Huang and J. M. Lin, “Data Diagnosis of Power System Operation Using Integrated Data Mining Technique,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 839-843.
  280. S. J. Huang and C. Y. Huang, “Enhancement of Data Structure of Load Flow Using XML-Based Data Exchange Technique,” Proceedings of the 22nd Symposium on Electrical Power Engineering, Taiwan, November 2001, pp. 601-605.
  281. S. J. Huang, J. M. Lin, and K. R. Shih, “Application of Gap Statistical Algorithm-Based Data Mining Technique for Bad Data Detection,” Sixth Conference on Artificial Intelligence and Applications, Kaohsiung, Taiwan, November 2001, pp.329-334.
  282. S. J. Huang and P. S. Tseng, “Strategic Infrastructure of Transactions Decision System in Deregulated Power Systems,” International Conference on Information Management, Taiwan, May 2001, pp. 2.5.1-2.5.8.
  283. S. J. Huang, P. S. Tseng, and C. S. Hong, “Enhancement of Web-Based Load Flow Computation Using Java,” 2000 Conference on Industrial Automatic Control and Power Applications, Taiwan, December 2000, pp. D1.6-D1.11.
  284. S. J. Huang and W. F. Su, “Harmonic Compensation Strategy for Industrial Power Converters,” 2000 Conference on Industrial Automatic Control and Power Applications, Taiwan, December 2000, pp. B1.13-B1.18.
  285. S. J. Huang, K. R. Shih, and J. M. Lin, “Application of A Robust Algorithm Embedded with Exponential Function for Dynamic State Estimation in A Power System,” 2000 Conference on Industrial Automatic Control and Power Applications, Taiwan, December 2000, pp. D1.24-D1.28.
  286. S. J. Huang, W. F. Su, and C. L. Huang, “Decisions on the Operation Scheme of Backup Power Supply Systems,” 2000 Conference on Industrial Automatic Control and Power Applications, Taiwan, December 2000, pp. A1.19-A1.24.
  287. S. J. Huang, C. C. Lin, Y. C. Lin, and C. C. Wu, “Application of GIS to Enhance the Maintenance and Management in Telecommunication Networks,” National Symposium on Telecommunications, Taiwan, December 2000, pp. 402-407.
  288. S. J. Huang and C. C. Lin, “Feasibility Assessment on the Application of Real-Time Transport Protocol,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 1339-1343.
  289. W. F. Su, S. J. Huang, C. L. Huang, and C. E. Lin, “A Prototype Design for the Loss-Monitoring of Electrical Power Transformers,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 1368-1372.
  290. S. J. Huang, C. T. Hsieh, and C. W. Lu, “A Novel Wavelet Function-Embedded Wavelet Transform for Detection of Power System Disturbances,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 1205-1210.
  291. S. J. Huang, J. K. Shen, and Z. J. Hsieh, “An Application of Direct Torque Control Method for Speed Sensorless,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 522-526.
  292. S. J. Huang, T. S. Chiu, F. S. Pai, and C. J. Huang, “Design of an Electronic Alternative-Current Load Simulator,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 743- 748.
  293. S. J. Huang and P. S. Tseng, “Design of A Java-Enhanced Virtual Instrument Prototype for Electric Power Measurement,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 1316-1320.
  294. S. J. Huang, K. R. Shih, and J. M. Lin, “Application of Neural Network-Enhanced Extended Kalman Filtering Approach for Dynamic State Estimation of A Power System,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 749-754.
  295. S. J. Huang and C. C. Huang, “An Under-Frequency Load Shedding Scheme Design via an Exponential Load-Frequency Control Model,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 6-10.
  296. C. W. Lu, S. J. Huang, and C. L. Huang, “Application of Continuous Wavelet Transform for Digital Equivalent Voltage-Flickering Measurement,” Proceedings of the 21st Symposium on Electrical Power Engineering, Taiwan, November 2000, pp. 264-269.
  297. S. J. Huang, J. M. Lin, and K. R. Shih, “Application of Integrated Sliding Mode Fuzzy Control to Dynamic State Estimation,” Fifth Conference on Artificial Intelligence and Applications, Taipei, Taiwan, November 2000, pp. 340-346.
  298. S. J. Huang and K. R. Shih, “Embedment of Abductive Inference Model with Fuzzy System and Its Model Building,” Fifth Conference on Artificial Intelligence and Applications, Taipei, Taiwan, November 2000, pp. 624-629.
  299. S. J. Huang and F. S. Pai, “An Active Islanding Detection Method of Utility Interactive Photovoltaic System,” IEEE PES 2000 Summer Meeting, Seattle, USA, July 2000, pp. 1750-1755.
  300. S. J. Huang and C. T. Hsieh, “Computation of Continuous Wavelet Transform via A New Wavelet Function for Visualization of Power system Disturbances,” IEEE PES 2000 Summer Meeting, Seattle, USA, July 2000, pp. 951-955.
  301. S. J. Huang and F. S. Pai, “Design of an Islanding Detection Circuit with Self-Commutated Static Power Converters,” PESC 2000, Power Electronics Specialist Conference, Galway, Ireland, June 2000, pp. 668-673.
  302. S. J. Huang and C. W. Lu, “A LabVIEW-aided Electric Power Signal Measurement Design,” Automatic Control Conference, Hsinchu, Taiwan, March 2000, pp. 1010-1015.
  303. S. J. Huang, C. T. Hsieh, T. M. Yang, M. H. Huang, and J. T. Huang, “Wavelet Transform Enhanced with Huffman Coding and Its Application to Power Signal Analysis,” Automatic Control Conference, Hsinchu, Taiwan, March 2000, pp. 199-204.
Patent
more
less
  1. ELECTROMAGNETIC THERMOTHERAPY NEEDLE (I541001)
  2. DEEP MAGNETIC FIELD GENERATING APPARATUS ( I541045)
  3. METHOD FOR DESIGN INDUCTIVE COILS (I541670)
  4. RAIN SHIELDING APPARATUS USED FOR CARS AND CARS WITH THE RAIN SHIELDING APPARATUS (M522872)
  5. AN ELECTRIC POWER SUPPLY SYSTEM COOPERATED BY A BATTERY AND A SUPER CAPACITOR ( I524629)
  6. DEVICE FOR MAGNETIZING A MOTOR (I497875)
  7. METHOD OF BATTERY CHARGING ( I484682)
  8. A METHOD FOR CALCULATING A CAPACITY OF A SUPER CAPACITOR ( I468713)
  9. DEEP MAGNETIC FIELD GENERATING MODULE AND ELECTROMAGNETIC THERMOTHERAPY APPARATUS (I462758)
  10. RESONANT INVERTER AND PLASMA DRIVING SYSTEM INCLUDING THE SAME (M471116)
  11. METHOD OF ESTIMATING BATTERY RESIDUAL CAPACITY AND SYSTEM USING THE SAME (I408393)
  12. BATTERY-CHARGING EQUALIZATION CIRCUIT, BATTERY CELL, AND BATTERY-CHARGING EQUALIZATION METHOD (I405385)
  13. Method and System, for Detecting Stand-Alone Operation of A Distributed generating System(US Patent No. 7342758)
Others
more
less
Projects
  1. Strategies for Laboratory Measurement Quality Optimization and Environmental Interference Prevention (2023)
  2. Technical Data Integration and Compilation of "Grid-Level Energy Storage Sub-sector"
  3. Electric Circuit Design for Highly Accelerated Life Testing Accuracy Improvement of Multi-layer Ceramic Capacitors, 2021-2023.
  4. Application of Multi-Objective Search Algorithm and Stardust Energy Clustering Intelligence Modeling for Grid-Connected Distributed Generation Planning and Decision-Making Study, 2021-2024.
  5. A Study on Voltage Sag, Energy-Saving, and Energy-Storage Improvement, 2021.
  6. Integration of Intelligent Techniques with Deep-Learning Network for Energy-Storage Planning and Decision-Making Study, 2018-2021.
  7. Application of Nature Energy Search and Biological Evolution Intelligence Modeling for Distribution Transformer Maintenance Planning and Inspection Strategy Decision Study, 2018-2021.
  8. Study of Inspection of Electric Circuit Modules, 2020.
  9. Design of Contactless Power Transmission Module, 2020.
  10. Application of Intelligent Decision Techniques to Planning and Management of Energy-Storage Equipment in Electrical Power Distribution Networks, 2017-2018.
  11. High-Power Converter Circuit Module with Digital Control Development, 2017.
  12. Application of Bio-Mating and Foraging Intelligence Modeling to Phase Connection of Distribution System Transformers Including Grid-Connected Energy Storage Considerations, 2015-2018.
  13. Design and Implementation of Intelligent Energy Control and Flexible Modular Design for Integration of Multiple Energy Storage Devices with Fuel Cells, 2016.
  14. Design and Development of Ultracapacitors and Fuel Cells Energy Estimation and Power Dispatch System Integration, 2015.
  15. Wireless Charging System for Electric Vehicles, 2014-2015.
  16. Design and Development of Ultracapacitors and Fuel Cells Energy Estimation and Power Dispatch System Integration, 2015.
  17. Application of Bio-inspired Intelligent Algorithm to Distribution System Planning and Transformer Placement Study Including Public Impressions, 2014-2017.
  18. Design and Development of Vanadium Redox-Flow Batteries and Wind Energy Generation & Storage System Integration, 2013.
  19. Blueprint Planning and Prototype Design of Wireless Charging Techniques, 2013.
  20. Electromagnetic Thermotherapy Applied to Tumor Ablation and Organ Hemostasis (Co-PI), 2013-2014.
  21. Application of Logic-Thinking Intelligence-Inspired Approach to Electric Power Operation Decision Support and Equipment Coordination Control Study, 2012-2015.
  22. Application of Foraging and Clustering Intelligence to Operation and Planning Enhancement of Overhead and Underground Transmission Systems, 2011-2012.
  23. Characteristics Classification and Abnormal Load Detection System of Home Appliance, 2011.
  24. A Study on Electric Motor Industry Knowledge Exchange Mechanism, 2011.
  25. Wide-Scale Atmospheric-Pressure Plasma Equipment Technology Development, 2011.
  26. Home Appliance Electricity Consumption Analysis System, 2011.
  27. Internet-of-Things Enhanced Intelligent Home Electricity Management, 2011.
  28. Application of Biological Clustering and Taxis Intelligence to Operation Enhancement of Distribution Systems, 2010-2013.
  29. Performance Evaluation and Analysis of Utility Load Data Transfer via Wireless Network under Advanced Metering Infrastructure Operation, 2010.
  30. A Study of Planning Strategies, Control, and Operation Towards the Clean Net, 2009-2010.
  31. Integration of Advanced Metering Infrastructure (AMI) with Demand Response Control Strategy at Customer Load Side, D11-4, 2009.
  32. Application of Bio-Intelligence for Capacitor Planning and Decision Support Study, 2009-2010.
  33. Application of Bionics to Decision Support of Power System Protection Studies, 2008-2011.
  34. Application and Realization of Intelligent Electronic Devices to Distributed Power Monitoring, NSC96-ET-7-006-007, 2007-2008.
  35. Integration and FPGA Realization of Hilbert Transform and Wavelet Transform for Grid-Connected Distributed Generation System Power Quality Analysis, NSC96-2221-E-006-321, 2007-2008.
  36. Integration of Radio Frequency Identification Devices with Wireless Sensor Network for Electric Power Equipment Operation Supervision, NSC96-2221-E006-314, 2007-2009.
  37. Enhancement of Grid-Connected Distributed Generation System Operation and Control, NSC95-2221-E-006-485, 2006-2007.
  38. Application of Hilbert-Huang Transform for Electric Power Quality Analysis of Grid System Connected with Distributed Generations, NSC95-2221-E-006-486, 2006-2007.
  39. Integration of FPGA with System-On-a-Chip for Power System State Estimation Applications and Studies, NSC95-2221-E-006-452, 2006-2007.
  40. Study on Security Enhancement of Distributed Generation Systems Connected to Utility Grid Systems, NSC94-2213-E-006-133, 2005-2006.
  41. Inspection of Transformer Inrush Current in a Distributed Generation System via Wavelet Transform Approach, NSC94-2213-E-006-134, 2005-2006.
  42. FPGA Hardware Realization of Slantlet Transform and Its Application to Electric Power Quality Supervision, NSC94-2213-E-006-127, 2005-2006.
  43. Simulation and Test of the Influence of Induction Motor and Inverter on the Power System of Rolling Mill Steel Plant, RE93027, 2005.
  44. Study on Distributed Generation Systems Applied for Enhancement of Electric Power Quality in Distribution Systems, NSC93-2213-E-006-142, 2004-2005.
  45. Application of Wavelet Transform to Islanding Detection of Distributed Generation Systems, NSC93-2213-E-006-143, 2004-2005.
  46. FPGA Prototyping of Chip Design for Power Flow Computations, NSC93-2213-E-006-144, 2004-2005.
  47. Design and Implementation of High-Performance Electric Power Quality Monitoring Technique, NSC93-ET-7-006-004-ET, 2004.
  48. FPGA Realization of Fractal Geometry and Its Application to Electric Power Quality Monitoring, NSC92-2213-E-006-085, 2003-2004.
  49. Integration of Wireless Network with Bluetooth Transmission Protocol for Power System Communication Infrastructure, NSC92-2213-E-006-086, 2003-2004.
  50. Application of the Lightning Elimination System and Lightning Rod in Transmission Lines for Lightning Protection, TPC-546-92-2108-02, 2003-2004.
  51. Distributed Personal Digital Assistants (PDAs) Embedded and Applied for the Supervision of Electric Power Quality, NSC91-2213-E-006-133, 2002-2003.
  52. Study of Integrating Asymmetric Digital Subscriber Line with Real-Time Transport Protocol for Power System Communication Infrastructure, NSC91-2213-E-006-134, 2002-2003.
  53. Implementation of Bluetooth-Embedded PDA Digital Measurement Network, NSC91-2622-E-006-074, 2002.
  54. Feasibility Assessment on the Application of Real-Time Transport Protocol in Power System Communication Infrastructure, NSC90-2213-E-006-104, 2001-2002.
  55. FPGA Realization of Wavelet Transform and Its Application to Electric Power Quality Monitoring, NSC90-2213-E-006-103, 2001-2002.
  56. Development of Active Islanding Detection Approach for Dispersed Photovoltaic Power Systems, NSC89-2213-E-006-180, 2000-2001.
  57. Implementation of An Open-Architecture Communication Library for Power System Usage over ATM Network, NSC89-2213-E-006-181, 2000-2001.
  58. Application of ATM Network for An Integrated Distribution SCADA-GIS System, NSC89-2213-E-006-106, 1999-2000.
  59. Application of Wavelet Transform Approach to Supervise Voltage Flickering in A Power System, NSC89-2213-E-006-097, 1999-2000.
  60. Game Theory Applied to Transactions Strategies in A Deregulated Power System, NSC88-TPC-E-006-013, 1998-1999.
  61. Application of Geographic Information System to Distribution System Planning of the Fifth Replan Area in Tainan City, NSC88-2213-E-006-075, 1998-1999.
  62. Application of Neural Network Approach to Economic Operation of Generation and Boiler Scheduling in Lin-Yuan Cogeneration Plant of Chinese Petroleum Company, NSC87-2213-E-006-088, 1997-1998.
  63. Supervision of Power System Harmonics Using Wavelets, NSC86-2213-E-214-012, 1996-1997.
  64. Application of Neural Networks to Load Management in Kaohsiung Polytechnic Institute, NSC86-2213-E-214-010, 1996-1997.
  65. Detection of Electric Power Equipment Winding Shorts, NSC85-2213-E-214-007, 1995-1996.
  66. Intelligent Computations Applied to Assess Power System Security, NSC84-2213-E-214-019, 1995.
Classes
2023 Fall
2024 Spring
Students
Current Academic Year Lab Members
PhD
蔡居甫
林正義
許哲榮
陳明德
梁耀祥
邱培碩
王自宗
Master
林博俊
曾文賢
吳哲毓
呂旻璇
謝翔宇
楊柏煒
韋茄勛
葉天羽
廖奕翔
顏申坤
黃柏鈞
李宥霖
蔡靖彥
Graduates of all Previous Years
Ph.D.
89
謝承道   吳晉昌
90
蘇偉府   黃清池
91
白富升
92
史光榮
93
林矩民   呂振文
96
林志杰
100
萬興和   蔡金順
101
劉憲宗
102
黃柏閣
104
李宗勳   謝建賢   謝家偉
105
洪得峻   承江永
107
黃冠傑
Master
88
劉正偉   蔡瑞文
89
蔡政宏
90
邱定松   洪紹恩   沈進坤   曾寶勳
91
吳志銘   林仲璋   洪承昇   楊天助
92
賴雲正   黃明詳   黃朝源   孫嘉宏   蕭邱漢
93
王建國   林溫哲   洪武德   陳俊穎   李宗勳   周明忠
94
李裕仁   黃健紘   侯冠竹   饒仁均   陳奕呈   陳建中
95
甘俊山   謝竹修   陳鵬宇   徐維揚   蔣昌仁   黃仁煜   詹立得   杜明河
96
李志勇   林俊銘   汪俊宏   黃柏閣   張一明   王仁宏   莊昇翰
97
許?豪   張文旗   李豐裕   郭建志   簡佑銘   林俊賢   吳佳蓉
98
王逢祺   蘇乃諏   陳敬文   吳宗憲   賴信光   莊雲傑   歐忠倫   黃裕翔
99
林子揚   張宗運   林德銘   陳信宏   林佑歷
100
吳海瑞   張春富   林鵬遠   林家宏   楊叔軒   林佳賢
101
林筑婷   溫士範   張哲瑋   方祥安   李雨哲
102
黃子浩   古鎮瑋
103
蔡世傑   林峻偉   廖昭銘   陳映蓉   陳睿媛
104
林于傑   王慶榆   古佩弘   戴德育   劉時雨   李建鋐   陳佳汶
105
吳彥和   張志堯   吳冠德   溫品沅   李韋華   姜棓仁   林曜誠   謝承宏   盧天利
106
魏志超   陳冠龍   林育任   吳宗穎
107
邱培碩   許哲榮   戴碩輝   王丁民   蘇峻立   黃茂珅
108
林恒毅   吳家璿   游駿良   林昱廷   楊雅茗   侯軍瑋
109
陳正一   吳明家   張彥傑   王勇鈞   廖昱信   蔣誠杰   吳宗學   李懿倫
110
陳柏融   陳秉寬   吳見乙   郭晉崴   王自宗   許均瑋
111
楊育政   陳品丞   鄭宸旻   林希承   洪晏蓁
112
王騏熏   許瀚升   吳祝樟   陳宥潾   陳冠廷   楊大維   蔡兆昀
Honors
  1. Teaching Excellence Awards, National Cheng Kung University (2023)
  2. Best Paper Award, Electric Power Engineering Symposium (2022)
  3. Best Paper Award, Intelligent Living Technology Conference (2022)
  4. Best Thesis, Taiwan Consumer Electronics Society (2020)
  5. Second Prize, Electric Power Practice Competition, Ministry of Science and Technology (2020)
  6. Best Paper Award, Electric Power Engineering Symposium (2020)
  7. Second Prize, Electric Power Practice Competition, Ministry of Science and Technology (2019)
  8. Best Paper Award, Electric Power Engineering Symposium (2019)
  9. Best Dissertation Advising Award, Taiwan Institute of Electrical and Electronics Engineering (2018)
  10. K. T. Lee Golden Medal Award (2018)
  11. Best Paper Award, Power Electronics Conference (2018)
  12. Best Paper Award, Electric Power Engineering Symposium (2017)
  13. Second Prize, Electric Power Practice Competition, Ministry of Science and Technology (2017)
  14. Outstanding Technical Achievement Award, IEEE Tainan Section (2016)
  15. Best Paper Award, Electric Power Engineering Symposium (2016)
  16. Best Paper Award, Power Electronics Conference (2016)
  17. Delta Award , IEEE Tainan Section (2015)
  18. Best Paper Award, Intelligent Living Technology Conference (2015)
  19. Best Paper Award, Electric Power Engineering Symposium (2014)
  20. Best Paper Award, Intelligent Living Technology Conference (2014)
  21. Teaching Excellence Award, College of Electrical Engineering and Computer Science, National Cheng Kung University (2013)
  22. Academic-Industry Cooperation Excellence Award of Electric Motor Technology Center, National Cheng Kung University (2012)
  23. Mentor Award, College of Electrical Engineering and Computer Science, National Cheng Kung University (2008)
  24. The Cambridge Blue Book (2008)
  25. Who’s Who in Asia (2006)
  26. Outstanding Research Award, National Science Council (2004)
  27. Engineering Professor Award, Kaohsiung Division, Chinese Institute of Electrical Engineering (2004)
  28. Outstanding Young Electrical Engineer Award, Chinese Institute of Electrical Engineering (2002)
  29. Youth Engineer Award, Kaohsiung Division, Chinese Institute of Electrical Engineering (2002)
  30. IEEE Senior Member (2001)
  31. Who’s Who in the World (2000)
  32. Who’s Who in Science and Engineering (2000)
NCKU EE